Jump to content
SAU Community

Recommended Posts

Hi all, hoping some of you guys can answer a few questions for me.

Firstly, has anyone found a reputable source for bodykits for 4 door R32 GTS-T's? Specifically Vertex style kits?

Secondly, has anyone tryed to fit R33 GTR factory wheels to their 4 door? I know the wheels physically fit, but I would like to confirm how much work in terms of guard flaring/rolling would be realistically required to accomodate these wheels on the 4 door - assuming the car is lowered 1.5-2 inches all around.

Thirdly, R32 GTR rear seats in a 4 door - possible or impossible?

Cheers,

Nick :rofl:

Link to comment
https://www.sau.com.au/forums/topic/103997-calling-4-door-r32-owners/
Share on other sites

"Secondly, has anyone tryed to fit R33 GTR factory wheels to their 4 door? I know the wheels physically fit, but I would like to confirm how much work in terms of guard flaring/rolling would be realistically required to accomodate these wheels on the 4 door - assuming the car is lowered 1.5-2 inches all around."

Ive got s15 rims on my car and its fairly low no probs with scrub biggest tyres I run are 225's

Hi all, hoping some of you guys can answer a few questions for me.

No worries Blitzeh :P

Firstly, has anyone found a reputable source for bodykits for 4 door R32 GTS-T's? Specifically Vertex style kits?

Try G-Force in syd, Avi Prasad is the bloke's name who runs it I think. He's on this forum, and I think he was looking at becoming a sponsor, dunno how he went with it. His website is http://www.jap.com.au in any case. The kits fit pretty well from the ones I've seen, and his prices are pretty damn good. The website has the coupe kit listed only, but I remember him mentioning the 4 door kit was in development last year, so it might be ready now.
Secondly, has anyone tryed to fit R33 GTR factory wheels to their 4 door? I know the wheels physically fit, but I would like to confirm how much work in terms of guard flaring/rolling would be realistically required to accomodate these wheels on the 4 door - assuming the car is lowered 1.5-2 inches all around.

Roll and flare of guards required in the front, might be able to get away with a roll only in the back. 4 Doors look tougher with flares all around anyways.
Thirdly, R32 GTR rear seats in a 4 door - possible or impossible?

Possible, I've seen a few cars with em done... however the mounting positions don't line up exactly the same, some customising is required, and shutting the door is a little harder.
Hi all, hoping some of you guys can answer a few questions for me.

Firstly, has anyone found a reputable source for bodykits for 4 door R32 GTS-T's? Specifically Vertex style kits?

Secondly, has anyone tryed to fit R33 GTR factory wheels to their 4 door? I know the wheels physically fit, but I would like to confirm how much work in terms of guard flaring/rolling would be realistically required to accomodate these wheels on the 4 door - assuming the car is lowered 1.5-2 inches all around.

Thirdly, R32 GTR rear seats in a 4 door - possible or impossible?

All possible... A group called Panteraftermarket (www.pantheraftermarket.com) do Vertex bodykits for 4 doors. Or Adrenalin Autosports as well, located in Sydney and Queensland respectively.

R33 GTR wheels will fit. Depending on your ride height, you might have to roll the guards, namely the rears. I had too.

And I also have an R32 GTR seat in my car... fit like a glove.

p.s Are you stalking me?? haha :rofl:

Here's Panther...

Panther Aftermarket

www.pantheraftermarket.com

HEAD OFFICE

Unit 8 Industrial units

Crescent Head Road

KEMPSEY

PH: 02)6562-2556

FAX: 02)6562-2556

EMAIL: [email protected]

Bank Details for Direct Deposit

ACC Name: Panther Aftermarket

BSB: 032-580

ACC:146589

I'll have to get back to you with Adrenalin.

what are the offsets of R33 gtr rims?

ive got 18x9 +30 on the back of mine and they fit without any modifications. and my car is quite low... can just see the top of the tyre under the guard.

are the leather gts-t seats different to other gts-t and gtr seats? cos i tried puttin my mates leather seats in my car (cos mine where out and people needed to be driven places) and the backrest was too short

how do u roll the rears when theres no real guard to roll? theres like 2cm of panel that goers around the wheel

I had it done from group in richmond, just normal guard rolling machine. $50 a corner. It's not all the way round, they just rolled where the tyre would sit and a small surrounding area.

  • 2 weeks later...

Heres an update for you all.

I have fitted R33 GTR wheels without a problem, mind you the car isnt lowered as yet, however the wheels have advan 225's which are undersized for these rims on a GTR, but work well for this application.

GTST: I had R32 GTR wheels on the car previously and noticed a bit of rub on turn, but havent as yet with the 33 GTR wheels - odd.

For some reason im really keen on the 4 door now and its my new project - so the hunt for parts continues!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...