Jump to content
SAU Community

Recommended Posts

G,day from SA.

Keir & I were keen on bringing our GTRs over on the 15th & asked

Mr Pike (manager at Kiwana) if there was any help available to make this possible.Unfortunately they are unable to subsidise any of the costs for bringing 2 cars & teams over to race, & because neither of us have sponsors it is not viable for us to come. I am dissappointed, as we both were looking forward to continuing out GTR street tyre battle over in WA.

Maybe next year there will be a Heads up/Street tyre class just for

4WD turbo cars & if enough spectator interest perhaps some of the organisers of these meetings will be able to justify subsidies.

Thanks to Sean & Nigel for your interest - maybe next year fellas.

Link to comment
https://www.sau.com.au/forums/topic/10483-wa-shootout-on-15th/
Share on other sites

Munro,

That's a real pity, cause it would have been an awesome sight to see. The track here is excellent, so the times would have been very good. I would much prefer to see a street GTR than some of the other drag racers they have there.

Maybe next year, keep up the good work.

See'ya:burnout:

Last Saturday I ran my first 9 sec pass - a 9.94.

Then I beat Keir's time with a 9.66.

He came back with a 9.51 @ 150 mph.

My final run was a 9.69 @ 148.95 mph.

The cars are very close now & it is getting interesting.

The 15th is still 4 weeks away - we'll just have to wait & see.

Is that how you spell Kwinana! My bad.

No - I'm sure there are lots of private racers that are in the same

position.Car transport,plane tickets,acommodation for 5 guys per

team,meals,fuel,entry fees,etc,etc - it's about $5000 per team.

Thats why proffessional race teams have sponsors & the cars are

covered in vinyl & they can travel to all the interstate meetings.

Our cars are clean looking street cars & we want to keep them that way. Where there's a will, there's a way - stay tuned.

Sean,

I totally agree, I'm prepared to push the issue here, because I think that there is alot of interest in special events such as these. Everyone has seen nitro funny cars etc, but street cars doing 9secs is unbelievable.

See'ya:burnout:

I think all of WAs Jap car supporters should rally this issue.

The Motorplex is still a V8 ape dominated show, and the

management should see the time of Tech cars is here.

We have had overwhelming support for the Miss P'IGGY

rail with an SR20 DET in it.

Lets really get together on this issue and have power in

numbers.

heres his e mail address

[email protected]

Dear Peter

I am writing to you as a frequent racer and spectator to the Motorplex. After travelling to Adelaide for the 4.6 and rotary meet there I met and spoke with John Munro ( 9.6 second Nissan GTR ) and also saw him race Keir Wilson (also ( 9.5 second GTR). I have spoken with John since ive returned and he mentioned he would like to bring both his car and team and that Keir was also interested to run heads up with John here in Perth. Both these cars are at the forefront of technology running street rubber and are very well presented vehicles. With such a large following now in Perth with imported cars seeing both these cars running at the Motorplex would be awesome. Keirs car is currently the quickest of the two cars but it seems each time they run now a new record is broken and their progress is well documented in many magazines lately.

John mentioned that the cost of bringing these cars across to race was huge as neither of them have big sponsors themselves to offset the costs. Would the Motorplex please consider helping these two teams with sponsorship to reduce the cost in transport.

Regards

Sean

heres my effort

Bully,

We are talking about a reasonable amount of money required, and unfortunately due to street GTR's running with no advertising then sponsorship is unlikely. Hopefully if enough of us email peter then he may change his mind.

See'ya:burnout:

yer but just the fact that they r imported cars is an advertisment in itself dont you think --if they run well the 16-17 year old will wnat one who in turn will pester mum and dad etc etc etc --- hmm thats how i ened up with 2 imports in the shed, ill still write an email tomorrow night but maybe someone like c-red.x speed could sponser the bracket they race in at the plex to spread the burden

my 2 cents

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...