Jump to content
SAU Community

Recommended Posts

G,day from SA.

Keir & I were keen on bringing our GTRs over on the 15th & asked

Mr Pike (manager at Kiwana) if there was any help available to make this possible.Unfortunately they are unable to subsidise any of the costs for bringing 2 cars & teams over to race, & because neither of us have sponsors it is not viable for us to come. I am dissappointed, as we both were looking forward to continuing out GTR street tyre battle over in WA.

Maybe next year there will be a Heads up/Street tyre class just for

4WD turbo cars & if enough spectator interest perhaps some of the organisers of these meetings will be able to justify subsidies.

Thanks to Sean & Nigel for your interest - maybe next year fellas.

Link to comment
https://www.sau.com.au/forums/topic/10483-wa-shootout-on-15th/
Share on other sites

Munro,

That's a real pity, cause it would have been an awesome sight to see. The track here is excellent, so the times would have been very good. I would much prefer to see a street GTR than some of the other drag racers they have there.

Maybe next year, keep up the good work.

See'ya:burnout:

Last Saturday I ran my first 9 sec pass - a 9.94.

Then I beat Keir's time with a 9.66.

He came back with a 9.51 @ 150 mph.

My final run was a 9.69 @ 148.95 mph.

The cars are very close now & it is getting interesting.

The 15th is still 4 weeks away - we'll just have to wait & see.

Is that how you spell Kwinana! My bad.

No - I'm sure there are lots of private racers that are in the same

position.Car transport,plane tickets,acommodation for 5 guys per

team,meals,fuel,entry fees,etc,etc - it's about $5000 per team.

Thats why proffessional race teams have sponsors & the cars are

covered in vinyl & they can travel to all the interstate meetings.

Our cars are clean looking street cars & we want to keep them that way. Where there's a will, there's a way - stay tuned.

Sean,

I totally agree, I'm prepared to push the issue here, because I think that there is alot of interest in special events such as these. Everyone has seen nitro funny cars etc, but street cars doing 9secs is unbelievable.

See'ya:burnout:

I think all of WAs Jap car supporters should rally this issue.

The Motorplex is still a V8 ape dominated show, and the

management should see the time of Tech cars is here.

We have had overwhelming support for the Miss P'IGGY

rail with an SR20 DET in it.

Lets really get together on this issue and have power in

numbers.

heres his e mail address

[email protected]

Dear Peter

I am writing to you as a frequent racer and spectator to the Motorplex. After travelling to Adelaide for the 4.6 and rotary meet there I met and spoke with John Munro ( 9.6 second Nissan GTR ) and also saw him race Keir Wilson (also ( 9.5 second GTR). I have spoken with John since ive returned and he mentioned he would like to bring both his car and team and that Keir was also interested to run heads up with John here in Perth. Both these cars are at the forefront of technology running street rubber and are very well presented vehicles. With such a large following now in Perth with imported cars seeing both these cars running at the Motorplex would be awesome. Keirs car is currently the quickest of the two cars but it seems each time they run now a new record is broken and their progress is well documented in many magazines lately.

John mentioned that the cost of bringing these cars across to race was huge as neither of them have big sponsors themselves to offset the costs. Would the Motorplex please consider helping these two teams with sponsorship to reduce the cost in transport.

Regards

Sean

heres my effort

Bully,

We are talking about a reasonable amount of money required, and unfortunately due to street GTR's running with no advertising then sponsorship is unlikely. Hopefully if enough of us email peter then he may change his mind.

See'ya:burnout:

yer but just the fact that they r imported cars is an advertisment in itself dont you think --if they run well the 16-17 year old will wnat one who in turn will pester mum and dad etc etc etc --- hmm thats how i ened up with 2 imports in the shed, ill still write an email tomorrow night but maybe someone like c-red.x speed could sponser the bracket they race in at the plex to spread the burden

my 2 cents

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...