Jump to content
SAU Community

Recommended Posts

I'm not sure about a fuse, but if you take the headunit out, there is a wire that controls the remote aerial.

Sorry, I don't know what the colour is, look at the headunit installation guide thread. Etiher that, or disconnect the power to the aerial unit from just under it.

NB: signal will not be that good with the aerial inside the car. it's good though if you only listen to cds.

Edited by 97r33gtst-typeM
Thanx guys....

So to get to the ariel motor, i just have to remove the left hand plastic/carpet panel thingy in the boot and reach around and its the box i can feel yeah??

Power cable runs out the bottom?

spot on buddy! u might actually need to remove the whole motor to do it. unless u can find someone with really skinny hands.

When you have a look at the stock head unit aerial connection, you'll see there are actually 2 aerial connections. One for the aerial that goes up/down and one for the aerial that is a series of wires ON your rear window (amongst the deimster wires). If you don't want to the rear aerial to go up and down, simply use the other aerial wire and leave the motorised one disconnected. You should still get a decent radio reception with the "rear window" aerial.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The car remains in paint jail. I am now pretty convinced that the whole "RB25 Airboxes are kinda limiting to ~300kw" could be a thing. Also saw a good video from Engine Masters: (Sorry for FB link) (https://www.facebook.com/watch/?ref=search&v=761771519471924&external_log_id=c10bcbb6-2c39-4ff3-9240-287e9921fde6&q=Cold Air Considerations) Where they tested Pod Filter sizes and kept adding bends to a LS3 on an Engine Dyno to find if bends caused power loss. It's a good video worth watching - They did lose ~25hp from making an intake which had 3x90's and a 120 degree. They only lost maybe 1hp with a basic 90. I feel that by sealing up my airbox I have: 1) Created the same restriction a stock airbox would have. 2) Created a very convoluted set of intake 'pipes' by forcing all the air through the ducts. So I am pretty confident I'll be going full circle and have a huge hot air intake pod and actually see a benefit. The air does *not* stay hot once it gets flowing, aided by the ducts, and the pod can then pull air from anywhere. All the posts of yore talk about the stock airbox costing 10-15kw at 300kw+ but you know what? I f**king would very much like that 10-15kw and I remember my own pod filter in engine bay experiences. Turns out the GTT Reo and Headlight brackets really don't allow you to mount GTR items, no matter what the internet says. Various brackets have had to be made up to actually make it fit right for the front bar. Also some idiot mounted a 3L Accusump right where the bumper wants to go, so that has had to be 'relocated' To where, I am still not sure, but it's supposedly mounted in the pictures and I can't see it.
    • Sounds like the oil pressure light is wired into the oil temp sensor... As it warms up, resistance on temp sensor reduces, hence more current can flow and the dash light gets brighter.
    • Got the front subframe and suspension in.    
    • If it's cold in summer, then no issue. If it's cutting out every few seconds and you're not reaching your target temp, then there's an issue. One could be the pressure switch and the other issue could be the temp probe inside the evaporator.
×
×
  • Create New...