Jump to content
SAU Community

Recommended Posts

roflmao... J-Spec is not responsible for problems caused to relationships by the cars we supply.

As long as the credit card is free for her to use, it will be all good.

Don't you have a "REAL" job .. how the hell can you find enough time to buy 2 cars in the one week ?????

As long as the credit card is free for her to use, it will be all good.

Don't you have a "REAL" job .. how the hell can you find enough time to buy 2 cars in the one week ?????

Unfortunitly I work with WiZardOz (Gary), well we sort of work

I wish you would hurry up and buy my R33 so we can turn it into a race car!

  • 3 months later...

Finally got news my car is leaving Japan and should arrive on the 30th May

It has only been about 4 months sitting in Japan waiting for a boat

I have a pile of bits waiting to go on, so I can not wait

As big Kev use to say "I'm excited"

here is a link i found i havent looked into it yet but its sposed to be able to track ships etc have a look see cos if you nkow the ships name i think this will tell u where she is .http://www.sailwx.info/shiptrack/

  • 3 weeks later...

Finally got my car today

Had it delivered this avro to my house

Will send it to compliance in the next week or 2

Need to remove a few aftermarket things first

After sitting around the docks for 3-4 months, it could do with a good clean

Need a bit of a tidy up

Small rust spot on door under RH mirror and bodykit could do with a few screws

Rear carpet in hatch area has some damage, will need to replace it

It is a fair bit different to drive than my R33 manual

Feels a bit sluggish with auto and extra weight

Will have to work on this

Let the mods begin :dry:

any that u have taken since you took delivery of it?

you can get an R34 GTR for about 60k if you import it............. :drools: ...... my dream car

No, camera is in getting repaired

What ever that thing is on the dash, someone else wanted it more

It went missing

34gtr

Me likes this one

http://www.j-spec.com.au/list/index.php?ID=6418

post-14923-1149759520.jpg

post-14923-1149759576.jpg

post-14923-1149759654.jpg

  • 1 month later...

Well. after nearly 6 months to the day from when I first paided for the Stagea, I went toget it registered today.

Went to get a RWC, could not get the car on the hoist due to the side skirts, so the mechanic said "Ahh, it should be fine under there"

Went to check the front lights, the front parkers were not working, mechanic said "You will get around to fixing them"

So with the RWC out the way, I went to the QLD department of transport.

Filled out the right forms, waited another 30min to get served, went out side to get the vehicle checked. the lady could not read the engine number, so I read it out for her because it was too had to read. Luckly I had rembered the engine number from before hand.

Went back inside with paper work inhand, she went thru everything, went off to talk to the supervisor and came back to tell me I needed the original import approval, not a copy.

I got staight onto the phone to IAMSHE to ask for it. Phil advised me that after doing over 600 cars in QLD they never once need the original, a copy was fine.

So it did not matter what I said they would not register it. I will have wait another 2 days to get the original and then it should be on the road.

I have been waiting 6 months now, so what is another 2 days :wave:

I had the same question asked and all I had was the copy, which they accepted in the end but in reality in the hands of whom ever you meet at the counter. I was in there for near on 2 hours while they tried to work out what they were supposed to do so I had a bit of luck I think... I waited 3 solid months for my car to get here and I would have been fuming if I had missed rego because of a photocopy or fax of an import approval (how would the car have cleared customs without that?) that sort of stuff really sh*ts me!

Hope you get it sorted soon!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...