Jump to content
SAU Community

Recommended Posts

u could just tell us what causes bad fuel economy

I have two thoughts now, if your afrs are near on that 12.

The 12s are on WOT tune, so everything in between that and idol sucks ducks nuts. meaning drinking fuel as you dont drive round with your foot flat all the time.

2nd thing could be a fuel leak still, which would mean it could still be tuned properly. Just the fuel isnt all making it to the engine.

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

yer, it doesnt seem to matter whether i boost it or not, my economy is still bad

which leads me to think its something else

i would hope that the tune was done propperly, coz it cost a f**king fortune, surely i shouldnt have to tell my tuner to tune not just for WOT but for normal driving as well????

the economy was bad with the stock ecu anyway, so im pretty sure that the tune, while it may not be helping, isnt the issue

there is always a strong fuel smell when i reverse, but i can never smell fuel in the boot area after running the car

im interested in the evaporation issue the aussie fuel filler/nossle issue that was bought up before, and i pm'd the guy from nissan silvia who fixed his economy by replacing his charcoal cannister (he reckons he did nothing else) so, im going to hook mine up again also

my o2 sensor is brand new

ive had a heap of fuel hoses replaced as it was discovered that they were perishing (along with every other hose in my engine bay that ive had replaced)

this problem just seems to common, so many of us suffer from such bad economy

i want to know what causes it and how to fix it

spook i have no canister and i can get a bit over 400km with normal driving (which includes a bit of boost)

i got 350km last tank and that included a whole lot of boosting over glorious

can you pull up o2 sensor readings on your pfc? have you cleaned your afm recenty?

yer, ive been watching the o2 sensor readings on the hc

seems to be working correctly

i havent cleaned my afm

woudl it being dirty affect its readings?

ill check and see what sort of voltages its reading;

Maybe get a PFC retune?? My new car has a PFC and I get awesome ecconomy (411ks out of 35 L ;) ) The new car gets no fuel smell at all where as the R33 you could smell it all the time (Stock ECU) I think engine managment would be the main factor that effects fuel ecconomy

damn, some of these posts are crazy, the other day i got 350km with 36litres, and i have a stock ecu, with other mods, i have a power fc waiting to go in, these posts are sorta scaring me puting it in and tuning it :)

Spooks,

Go back to MM and get them to look at it firstly. I think that you should give them an opportunity to explain.

On a side note I had my PFC tuned there and am quite happy with the fuel economy, granted I mainly drive it on weekends and it is warmed up before every drive and then cooled down...

yer, im not convinced its the tune

fuel economy was bad before the pfc (350ks to a tank, with just exhaust, dump pipe, fmic and plenum)

im going to get my mechanic to check a few things out for me next service and see what he comes up with

then im going to get in touch with elite and see what he says

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...