Jump to content
SAU Community

Recommended Posts

Hi Guys,

Just installed a stereo on Saturday and having serious power issues! <_<

Installed - Pioneer Headunit 52W x 4, 6x9's & 5x10's

Stereo display 'dims' :D when a a bit of bass if passed thru and volume up but as soon as I turn on my headlights the entire unit shuts down. :D

I checked and power is being fed to the headunit while lights are on but obviously not enough.

Would i be correct in stating that my battery is not supplying enough power as the headunit display is 'dimming' shutting down once power is being fed elsewhere??!!

Fix???? Any help / advice! :(

Thanks in advance

Ando

Sounds like a power issue. Either a shonky battery, or a shonky alternator, or a shonky ground on the battery.

First thing to try is re-grounding the battery. Replace the negative cable with a new one, with new ring-clamp things, and clean up the area that it bolts to the chassis. This should fix a lot of things, but failing that, check your battery out. =-]

Hey thanks dude!

Fixxer - Mate this is both when the car is running and also when off! (in accessories)

Battery is actually a bit old and a little smaller than normal only just takes up half of the battery plate.... :P

RANDY - Mate yeah a mate is gonna lend me his battery next time and see if it solves the issue! Just wanted to make sure it wouldn't be anything more than just a battery / alternator

Cheers guys :(

Ando

you could also try running a thicker gauge constant power cable straight from the battery (with a fuse of course). but other than that i would be checking your earth point for the unit as well as the battery earth terminal is clean, and has good earth from the battery to body.

where did you pick up your earth from i bet you picked up the dash light illumination thinking that it was earth usiing a test light happens all the time just whip the unit out and put the (guessing) black wire straight to metal of the car

then try it

my 2 cents

cheers

A simple test for your alternator is to have your head lights on and rev the car. If the brightness of the lights increases with the revs then it will prob be an alternator problem as it's not supplying enough power at idle etc

Skybee has a great point that I thought was too obvious to point out.

The head unit should be grounded to the body, and you should never have to splice into another wire for anything.

And when I said "try replacing the ground wire", I should add; "with a much thicker one". =-]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I know why it happened and I’m embarrassed to say but I was testing the polarity of one of the led bulb to see which side was positive with a 12v battery and that’s when it decided to fry hoping I didn’t damage anything else
    • I came here to note that is a zener diode too base on the info there. Based on that, I'd also be suspicious that replacing it, and it's likely to do the same. A lot of use cases will see it used as either voltage protection, or to create a cheap but relatively stable fixed voltage supply. That would mean it has seen more voltage than it should, and has gone into voltage melt down. If there is something else in the circuit dumping out higher than it should voltages, that needs to be found too. It's quite likely they're trying to use the Zener to limit the voltage that is hitting through to the transistor beside it, so what ever goes to the zener is likely a signal, and they're using the transistor in that circuit to amplify it. Especially as it seems they've also got a capacitor across the zener. Looks like there is meant to be something "noisy" to that zener, and what ever it was, had a melt down. Looking at that picture, it also looks like there's some solder joints that really need redoing, and it might be worth having the whole board properly inspected.  Unfortunately, without being able to stick a multimeter on it, and start tracing it all out, I'm pretty much at a loss now to help. I don't even believe I have a climate control board from an R33 around here to pull apart and see if any of the circuit appears similar to give some ideas.
    • Nah - but you won't find anything on dismantling the seats in any such thing anyway.
    • Could be. Could also be that they sit around broken more. To be fair, you almost never see one driving around. I see more R chassis GTRs than the Renault ones.
    • Yeah. Nah. This is why I said My bold for my double emphasis. We're not talking about cars tuned to the edge of det here. We're talking about normal cars. Flame propagation speed and the amount of energy required to ignite the fuel are not significant factors when running at 1500-4000 rpm, and medium to light loads, like nearly every car on the road (except twin cab utes which are driven at 6k and 100% load all the time). There is no shortage of ignition energy available in any petrol engine. If there was, we'd all be in deep shit. The calorific value, on a volume basis, is significantly different, between 98 and 91, and that turns up immediately in consumption numbers. You can see the signal easily if you control for the other variables well enough, and/or collect enough stats. As to not seeing any benefit - we had a couple of EF and EL Falcons in the company fleet back in the late 90s and early 2000s. The EEC IV ECU in those things was particularly good at adding in timing as soon as knock headroom improved, which typically came from putting in some 95 or 98. The responsiveness and power improved noticeably, and the fuel consumption dropped considerably, just from going to 95. Less delta from there to 98 - almost not noticeable, compared to the big differences seen between 91 and 95. Way back in the day, when supermarkets first started selling fuel from their own stations, I did thousands of km in FNQ in a small Toyota. I can't remember if it was a Starlet or an early Yaris. Anyway - the supermarket servos were bringing in cheap fuel from Indonesia, and the other servos were still using locally refined gear. The fuel consumption was typically at least 5%, often as much as 8% worse on the Indo shit, presumably because they had a lot more oxygenated component in the brew, and were probably barely meeting the octane spec. Around the same time or maybe a bit later (like 25 years ago), I could tell the difference between Shell 98 and BP 98, and typically preferred to only use Shell then because the Skyline ran so much better on it. Years later I found the realtionship between them had swapped, as a consequence of yet more refinery closures. So I've only used BP 98 since. Although, I must say that I could not fault the odd tank of United 98 that I've run. It's probably the same stuff. It is also very important to remember that these findings are often dependent on region. With most of the refineries in Oz now dead, there's less variability in local stuff, and he majority of our fuels are not even refined here any more anyway. It probably depends more on which SE Asian refinery is currently cheapest to operate.
×
×
  • Create New...