Jump to content
SAU Community

Recommended Posts

Just lately my r32 has been fluttering while i have my foot is on the accelerator. It does it when i go up hills and on the highway when i give it a bit. When it does it my boost gauge bounces between about 3 and 7 psi. Sometimes it does it when i hit 7 psi and sometimes it does it at about 2 psi.

Does anyone know what the problem is?

Link to comment
https://www.sau.com.au/forums/topic/105615-car-is-fluttering-on-acceleration/
Share on other sites

the fluttering indicates air going back through your turbo which normally happens on cars without BOVs when the trottle closes. Since you are experiencing this issue with the throttle open you must have a blockage in the piping after your turbo and before your trottle. My guess would be something in your intercooler???

I would be more inclined to check for a blocked fuel filter, fouled spark plug or dodgy coil pack before pulling the piping apart...how exactly does something large enough to block you intake get past the mesh on the AFM and then through the turbo without you knowing about it?

Are you willing to put money on it if you are so sure.

The best way to approach any problem is to start with the basics.

Check the fuel sysetm, then check the ignition system, then check the intake.

If you come up trumps...then start your in depth diagnosis like computer fault codes and other things like that.

Or you could just take the car to a qualified mechanic and he'll do it all for you.

thanks for the replies, ive checked the coils and plugs and they are fine, would i need a fuel pressure gauge to check if fuel was the problem?

plus what is compressor surge?

It does it almost all the time when i hit 7psi in 5th gear on the highway and it doesnt matter if im doing 2500rpm or 3500rpm, its always when it hits 7psi. Could it be wastegate flutter? I have a custom dump pipe.

When I say compressor surge I am refering to compressed air being pushed back through the turbo when the throttle is closed causing a fluttering sound as the air is "Chopped" up.

I was think that since this happens when the throttle is open that maybe whilst travelling up hill something in the intercooler is blocking the air flow.

I realise that this is a long shot as you should know if somthing was in the intake piping but...

I "HAD" this problem with a high flowed RB25 turbo ( T3/T4 internals ) that GCG made up for me. Used to build boost and then start rapidly choofing ( surging ). When I got it back off them after the 3rd time, I just sold it as opposed to trying it out again, purchased a genuine HKS GT25/35 and hey presto............. Problem solved !!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...