Jump to content
SAU Community

Recommended Posts

RB25 with cryo treated block , crank and RB26 rods ,ACL bearings , ARP rod bolts and head stud kit , CP forged pistons, cemedic head gasket , aftermarket vavle springs , N1 oil pump , billet fly wheel , 3500 foot pound 5 puck brass button clutch , fully balanced ( optional nispro plenum , merg collector manifold , baffel sump ,) egine can be change to suit a GTS-t4 or GTR never been ran , cheap , call for details 0415359416 peter cheers

Link to comment
https://www.sau.com.au/forums/topic/105815-tuff-rb25/
Share on other sites

the sump ill include , but the plenum is welded to the runners to stop ari leaks the runners have been sand blarsted and painted and polished plenum with standard RB25 thottle body with XF butterfly 900 for the plenum because of the throttle body and all the welding and polishing

Link to comment
https://www.sau.com.au/forums/topic/105815-tuff-rb25/#findComment-1949029
Share on other sites

reciepts for Rb25 Stagea Motor parts -

tension bolts = 280

cryo treating = 300

valve springs = 300

gasket kit = 345

sump = 200

pistons and head stud kit = 1700

n1 oil pump = 400

rods = 300

racing bearings = 200

water pump = 100

porting = 400

nissan stagea motor = 1450

labour = 1400

all prices wee trade comes with cam covers painted with ash black with pearl.

PRICE = $6800 sry i had the price wrong

Link to comment
https://www.sau.com.au/forums/topic/105815-tuff-rb25/#findComment-1949137
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...