Jump to content
SAU Community

Recommended Posts

Item: 1993 R32 GTR. Burgundy. 76200K's

Location:Brisbane

Item Condition:Excellent

Reason for Selling:Selling to buy another car

Price and Payment Conditions:$25,000

Contact Details:Karl - 0422 32 39 37

Extra Info:Followed tutorial on uploading photos but only "X" shows up and not the photo so please follow link to carsales and carpoint for more pics:

http://www.carsales.com.au/pls/carsales/...rch_distance=25

and:

http://www.carpoint.com.au/used-car/NISSAN...nd/1161239.aspx

Immaculate car in top mechanical condition. Serviced every 5000klm at Chapman and Chapman in Brisbane. Speak to Andrew Chapman if you want to know more about this car...he knows because he chose the car for me after seeing/test driving/checking out quite a few cars. Car is factory fitted with rare and expensive options like genuine Nismo front seats and genuine Nismo sports exhaust (standard dumps, nismo front pipe and nismo cat back). Recent new additions is genuine Nismo full floor mat set (5 piece and still have old floor mats). I am the first Australian owner with the major service done by Andrew Chapman upon receiving ownership of the vehicle that included changing all fluids, and replacing the timing belt, etc - everything that needed to be done for the 100,000K service.

This car is as close to stock standard as they come with an integrated turbo timer to the 3 point immobilizer alarm. Interior is very neat and tidy, no melted dash, no broken air vents, no peeling trims, etc. commonly seen on a lot of other skylines. Has an Alpine single CD/MP3 player, upgraded speakers, and an amplifier. Car drives and feels tight with an engine that pulls strong and cleanly along with new tyres that were fitted less than 1000klms ago. If you want a GTR that's most certainly one of the best examples around, this is it.

Current rego will expire in March but will include 6mths rego.

Sorry, not interested in trading as i already have a second run around car.

Call me for more info and/or organise a time for inspection

Edited by poop
Link to comment
https://www.sau.com.au/forums/topic/106209-fs-1993-r32-gtr-burgundy/
Share on other sites

Upload pics to the SAU database underneath the text window in 'edit post'. Your first link to carsales is dead...

I bought my car from a Karl too. Very nice car and with stock air intake too, don't hardly see that anymore.

Good luck with the sale.

Upload pics to the SAU database underneath the text window in 'edit post'. Your first link to carsales is dead...

I bought my car from a Karl too. Very nice car and with stock air intake too, don't hardly see that anymore.

Good luck with the sale.

Thanks for telling me about the dead link, it's all fixed now. will try and upload pics again...

Edited by poop

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...