Jump to content
SAU Community

Recommended Posts

Hi all :) ,

Just wondering if anyone else has experienced this.

We still have the standard radio and cd player in our car :P and it doe's a rather strange thing.

I was mucking around with the radio one day and came across a channel that actually shocked me that I could get. :P

When the radio is set at a certain frequency we can pick up the police radio channel.

Has anyone else experienced this?

is this a complaint? lol i'll swap ya :P

what frequency is it set to exactally? i've seen japanese radios that have weirded out freq settings....like our JJJ in bris is 107.7, on the jap radio it would be like 98 or something rediculous (this is just an example, i know the gold coast is 97.7 :P)

is this a complaint? lol i'll swap ya :P

hell no..

no complaints here.

comes in quite handy actually. :P

not out near the car at the moment but from memory its 78.3 fm or somthing close to that.

is this a complaint? lol i'll swap ya :P

what frequency is it set to exactally?  i've seen japanese radios that have weirded out freq settings....like our JJJ in bris is 107.7, on the jap radio it would be like 98 or something rediculous (this is just an example, i know the gold coast is 97.7 :P)

The reason for this is japanese radios have a different frequency range than australian radios. you;ll have an adapter in series with your radio boosting the frequency of all chanels by 10 or 20Mhz, so if in Aus the station is 102.5, on your radio it will read 82.5, or if the staion is 94.6, the radio will read 84.6 or 74.6, i forget how it works sometimes. but basically it's out by a factor of either 10 or 20MHz because of this converter.

cool, so do your normal radio station freq's match up? it must be an australian standard/regulation or whatever you wanna call it, that our radios can only cover such a range (somethin like 88-108 or close to it)

consider urself special :P

edit: just noted ur reply terminal..i knew there was an easy explanation :P

Edited by timmmay

Mine's set for JJJ as well, the frequency for Sydney is 105.7, but the radio says 87.7.

I'm hanging to get rid of mine. The radio doesn't tune properly (the reception is crap on mine, so I'm guessing the frequeny band expander is a cheap one), I've blown two speakers in it because it's not loud OR clear enough, and the CD player jumps over even minor bumps. :(

I'm saving some money to get some new speakers and an amp, buy a single-DIN unit so I can put some gauges underneath it, and maybe get a sub in a super-small enclosure (as small as I can get away with) so it doesn't take too much room in the boot.

reception would be crap because of the booster not set up properly. i used ot get crap reception, lose tripleJ about 20km from canberra. when i got the radio place to fix another problem they noticed it wasn't hooked up right and now i can get it anywhere they transmit. even in the middle of nowhere.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Waaay ahead of ya....(evil laugh!!) Will show the fitment and spec details later when it isnt as rainy !
    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
×
×
  • Create New...