Jump to content
SAU Community

Importing A Car Question

lows_13
 Share

Recommended Posts

Jade Community Regular

Jade

Posted
Posted
having imported a number of cars my self i can tell you i have been granted expemtions to import cars pre charged with R12. yes that's right. R12. i'm not sure if you can get a licence to import equipment containing R12 (i think you cant), but you can get 1 off exemptions for R12. 1 per licencing period.

Hi Richard,

I really hate to contradict you ;) but I can tell you 100% positive that R12 gas is an illegal substance and has been since 1996 and no exemptions will be granted from DEH.

This can be confirmed by phoning Jo-Anne Beath who is the team leader of the relevant department at DEH. Her direct number is 02 6274 1603.

Cheers

Jo

Jade Community Regular

Jade

Posted
Posted
Sending it to NZ would be far quicker than sending it back to Japan i guess.

Quote

'both the receiver accumulator and the recharge ports must also be removed'

These are located on the car i assume?

Of course, they are a part of the Air Cond. system.

To put your mind at ease & to be crystal clear on the requirments covering of R12 I recommend you phone Jo-Anne Beath - her direct number is 02 6274 1603.

Cheers

Jo

funkymonkey Grand Master

funkymonkey

Posted
Posted

Series 1 R32's (pre Aug 1991) have R12, Series 2 R32's have R134A

Also, lows_13 I don't know what this import yard is up to. Here's some things to remember:

R12 gas can be disposed of by certified refrigerant handlers (who else would do it when you sign that doc that says "oops? won't happen again") who won't let the gas into the atmosphere but dispose of it properly.

R12 gas can't be degassed on australian soil, however, bond areas in various places around australia (including ports where cars land and are held in customs) are NOT considered australian soil (go figure). So all they had to do is send a certified air con guy to the bond area where they're held to degas it.

Exporting a car to NZ to have it degassed is the biggest load of crock I have ever heard. Either:

1. the import yard has NO clue what they are doing.

2. they are giving some limp wristed excuse to cover up delays in the car, or are formulating an excuse to bump up the price of the car.

Either way I'd be sceptical about handing over money to them if they gave me a story like that. I'm sure their car is great, but that's not how you do business.

Jade Community Regular

Jade

Posted
Posted (edited)
Exporting a car to NZ to have it degassed is the biggest load of crock I have ever heard. Either:

1. the import yard has NO clue what they are doing.

2. they are giving some limp wristed excuse to cover up delays in the car, or are formulating an excuse to bump up the price of the car.

Either way I'd be sceptical about handing over money to them if they gave me a story like that. I'm sure their car is great, but that's not how you do business.

Agreed. There is absolutely no reason to export the car to New Zealand. Something is amiss here!

You can make an undertaking with DEH to have the gas discharged and a retro air con system fitted by a licence holder in Australia. This is not an exemption - it is an undertaking and you have 21 days in which to fulfil the undertaking agreement. You need to organise this through DEH

Cheers

Jo

Edited by Jade
raz0r$harP.UK Grand Master

raz0r$harP.UK

Posted
Posted

Dude had plenty of time to figure out what was going on, thanks to all the posters on the first page. I even directed him to the DEH.

I thought it was doing it himself - but if he's using an import yard they should know all the procedures by now, and like you I don't know why they'd re-export the car. Sounds like a case of serious incompetence at the least here.

When making a quarantine entry the importer is required to answer questions about the refrigerant inside the car. How this important detail wasn't picked up earlier is pretty bad on their behalf.

Iron Chef Grand Master

Iron Chef

Posted
Posted
Series 1 R32's (pre Aug 1991) have R12, Series 2 R32's have R134A

Also, lows_13 I don't know what this import yard is up to. Here's some things to remember:

R12 gas can be disposed of by certified refrigerant handlers (who else would do it when you sign that doc that says "oops? won't happen again") who won't let the gas into the atmosphere but dispose of it properly.

R12 gas can't be degassed on australian soil, however, bond areas in various places around australia (including ports where cars land and are held in customs) are NOT considered australian soil (go figure). So all they had to do is send a certified air con guy to the bond area where they're held to degas it.

Exporting a car to NZ to have it degassed is the biggest load of crock I have ever heard. Either:

1. the import yard has NO clue what they are doing.

2. they are giving some limp wristed excuse to cover up delays in the car, or are formulating an excuse to bump up the price of the car.

Either way I'd be sceptical about handing over money to them if they gave me a story like that. I'm sure their car is great, but that's not how you do business.

Exactly what I told him - I've put Low S13 in contact with a guy who can de-gas aircons in the bond area in Adelaide, and yet the importer is still stuffing around. I suspect there's something else going on, like a stuff up on the import approval or something, but we shall see.

BTW - I read Jo-Anne's surname as BREATH, which is kinda sexy. Is she hot Jade? Do you have her number? lol

Jade Community Regular

Jade

Posted
Posted
BTW - I read Jo-Anne's surname as BREATH, which is kinda sexy. Is she hot Jade? Do you have her number? lol

BREATH would be quite funny considering she is the senior Policy Officer of the Government Environment Protection Division that is responsible for Ozone and Synthetic Gas :P

Can't help you in the looks department though, I've never met her.

Surely the number has sunk in by now LOL

Cheers

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...