Jump to content
SAU Community

Recommended Posts

Hi All

A mate of a mate tolf me that there are some import wreckers in southport, i have had no luck finding them, does anybody know where they are. I have tried the yellowpages and have still not found a thing. Cheers

PS: im after a drivers side front guard in wine red and a bumper support

Thanks

Link to comment
https://www.sau.com.au/forums/topic/106834-wreckers-in-southport/
Share on other sites

RMA imports.. opposite zupps car dealer on ferry road..

anyhow, its about time you realised there is sweet F.A. of use for imports on the coast :D you have to drive up to bris if you want parts, spares, or bodykits.. its one thing I've learned since being down here for a couple of years.

RMA imports.. opposite zupps car dealer on ferry road..

anyhow, its about time you realised there is sweet F.A. of use for imports on the coast :D you have to drive up to bris if you want parts, spares, or bodykits.. its one thing I've learned since being down here for a couple of years.

you dont have there number do you...its not in the yellow pages...but cheers for all your help

There is a place on the coast (not sure where exactly coz I met the guy at his house) that has helped me out with a few bits. I think the name is All Automotive and their number is 5537 5877. One of the owners posts here in the WTB section, username: gtrgodzilla. I got a type M front bar and reo off them for what I thought was a reasonable price.

There is another place I have discovered recently in Sinnamon Park. I have their card in the car but can't remember the name. Their number is 3715 6474. They have HEAPS of import parts.

Edited by Lazy-Bastard

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...