Jump to content
SAU Community

Recommended Posts

cost will all depend on what mods are on the car coz compliancecost will vary from state to state and also how much work has to be done to bring the car back to factory stock condition for compliance

as a guide my 93 r32 gtr cost me around 27 k to get into mydriveway licensed in WA andmy car had to have stock exhaust wheels and suspension put on it and boost controller and timer removed for compliance mine was a grade 4 as well

According to the sheet it's April 92, which makes it ineligible. The interior is marked a a C which suggests it might be a little rough inside - don't take auction grade 4 to mean it's really clean either, it seems auction houses are dishing grade 4s out to anything these days.

  • 3 weeks later...
According to the sheet it's April 92, which makes it ineligible. The interior is marked a a C which suggests it might be a little rough inside - don't take auction grade 4 to mean it's really clean either, it seems auction houses are dishing grade 4s out to anything these days.

i had a 92 gtr that was imported here in 1998?

i had a 92 gtr that was imported here in 1998?

Your car would have been imported under the 'old' scheme, which has now been superceded by SEVS. Under SEVS, JDM R32 GTR's are inelgible for import in the years that Nissan imported the model officially to Oz (ie 91 and perhaps 92, altough I thought they were only brought in by Nissan in 91).

It was the same under the old system too. Cars after 6/92 were eligible, so godzl you'll find your build date is after June. They weren't eligible between 6/91 and 6/92 when the GT-R was officially sold here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
×
×
  • Create New...