Jump to content
SAU Community

Recommended Posts

Is there anybody out there that might know the answer to this or at least point me in the direction of someone who could????

I can get a set of near new N1 cams, springs and followers VERY cheap, but wont waste my money if it won't work,,,,

cheers

John

What kind of RB25?

It's a 95 series 1 Turbo

as for the lifters,, I can get a whole package with cams lifters and springs,, all only 12 months old,,,

Am looking at bolting up a t70 shortly along with a few other mods so if I go that road I will no doubt need to upgrade throttle body and AFM,,, maybe to the Q45,,,

cheers

John

I think there are too many thing to be changed to make it worthwhile. You would be better off getting some second hand poncams from someone that are made for that engine.

I mean at the very least you will have issues with the cas fitting.

I think there are too many thing to be changed to make it worthwhile. You would be better off getting some second hand poncams from someone that are made for that engine.

I mean at the very least you will have issues with the cas fitting.

damn,,

anybody wanna buy a cheap set of N1 cams,,

lol

cheers

John

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did you pay with a credit card? I'd be putting a charge back through then finding a new sparky to sort it out. 
    • If you mean the alarm immobiliser; theyre internal to the alarm itself which makes that difficult; I couldnt even see where he put it; its not in the same place as last time; but with all black wiring it might be very challenging to trace  I had someone turn the key for me as I know it only primes for a couple of seconds As my post above; I am getting no voltage to the pump at all; but I am testing continuity of the power line (SB) from the pump plug to the relay fine. As well as the negative from the pump plug to a 12V constant.    Yeah; he blammed the no start on a bad battery; said I needed to get a new battery and it'll start. Turns out the battery drained because the tail lights had been on for half the day during the install (the rubber cushion on the brake switch gave out while he was testing it as I have a picture of the car from that morning with the tail lights off..i've replaced that). The battery was turning over the engine just fine for a long time; but got low since lights were draining it so it was too low to test a start after he finished. I bought a new one on his advice...$250 wasted. My original battery charged up just fine and is healthy.    It was running perfectly fine when I messed up the old alarm (programmed out the remotes). He couldnt start it after removing the old alarm; my assumption is that when he unhooked it; he didnt bridge the circuit back when trying to start it. Its always been perfectly fine. The ECU swap and pump were 2 years ago. It's never missed a beat in that time. 
    • This is a big issue for me without the diff. I just have zero drive from the passenger side when drivers side has no traction. Bec's parents place has a crazy steep driveway with odd camber and I have never been able to get up. My bro-in-law's 130i with an (unknown brand) LSD gets up fine as does their dad's Hiace. My car stays at the bottom. We have other odd camber roads around here as we're elevated a bit and if it's raining I can get totally stuck around some hairpins. 
    • Yeah, I am super excited for this.
    • Was the car running before he touched the car?
×
×
  • Create New...