Jump to content
SAU Community

Recommended Posts

Well they say the proof is in the pudding.

I had a lazy syncro in my R32 GTR. On the down shift from 5th to 4th the only way I could engage with out a gear crash was to double clutch and spike the revs to 4000. Anything less than that and "CRUNCH".

The change from 3rd to 4th was fine as long as the change was not rushed.

Choice - Medication or surgery?

Spoke to Stu who pointed me onto the "Redline" product range. Thanks Stu youve saved me a bucket of work and not to mention money.

4 Ltrs of Redline "Lightweight Shockproof" gear oil later and I now have silky smooth box. No kidding this stuff really works. I can't crash the gears if I try now. 3rd to 4th I can jam it through and not a sign of gear clash.

Id recommend this product to anyone having similar problems which I understand is a common issue with import R32's.

If you are interested in the science behind how it works it quite simple really. Most oils contain friction modifyers. Thats great for the teath of the gears and the roll shafts but does not help a wearing syncro at all. Syncros by nature use friction to work. In a nut shell, if the oil is too slippery the syncros struggle to do their job (Im talking worn parts here). Redline has reduced the friction modifyer content but replaced that with synthetics to improve gear wearing characteristics.

Woww great stuff.

Cheers

Edited by Bov
Link to comment
https://www.sau.com.au/forums/topic/108186-redline-experience/
Share on other sites

Well they say the proof is in the pudding.

I had a lazy syncro in my R32 GTR. On the down shift from 5th to 4th the only way I could engage with out a gear crash was to double clutch and spike the revs to 4000. Anything less than that and "CRUNCH".

The change from 3rd to 4th was fine as long as the change was not rushed.

Choice - Medication or surgery?

Spoke to Stu who pointed me onto the "Redline" product range. Thanks Stu youve saved me a bucket of work and not to mention money.

4 Ltrs of Redline "Lightweight Shockproof" gear oil later and I now have silky smooth box. No kidding this stuff really works. I can crash the gears if I try now. 3rd to 4th I can jam it through and not a sign of gear clash.

Id recommend this product to anyone having similar problems which I understand is a common issue with import R32's.

If you are interested in the science behind how it works it quite simple really. Most oils contain friction modifyers. Thats great for the teath of the gears and the roll shafts but does not help a wearing syncro at all. Syncros by nature use friction to work. In a nut shell, if the oil is too slippery the syncros struggle to do their job (Im talking worn parts here). Redline has reduced the friction modifyer content but replaced that with synthetics to improve gear wearing characteristics.

Woww great stuff.

Cheers

Yeah, top stuff! It kept my stock box together for as long as it did. I use it in my dog box, drives like a stocker (well kinda hahaha).

I use a 50/50 mix of lightweight and heavyweight shockproof oil. The 9 sec supra guys in the US use a 50/50 mix in there stock 6 speed getrags.

I spoke to the Aus redline tech support, they said it was fine to mix. Worth while for any box, in a car running more power from stock.

Well worth the money... much cheaper than a new box or a re-build.

EDIT:

I actually had a chance to have a chatt with one of the owners/ sales rep of redline at Bursons on argyle st. He was very informative and loved to chatt about cars and the product. They claim 30% extended component life with thy're engine oil product, as well as some big claims about they're G-Box oil's, diff oils's and water treatment. They have a performance product for allmost any application on or around your car. If you wan't any more info, go see Tony at Bursons in argyle st.

I recon I'll be switching from Motul Crono to they're performance oils, I allready use they're water treatment ( knocked 12 degrees off consistantly at the end of every run and if you have water temp/ign correction table set up right you can pick up a little more hp when it's hot, e.g. dragracing.) and the 50/50 mix of g-box oil in my dogbox.

Anything that is used and proven with V8 supercars can't be a bad thing.

Edited by XRATED
  • 3 years later...

hey sorry to drag up an old thread. But is this redline stuff like a addtive or a full replacment oil. so i just buy a 4L bottle of it dump my oil in my box now and refill it with this?? also dose it come in all diffrent weights? or just the one weight?

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...