Jump to content
SAU Community

Recommended Posts

Hi all, my mate just got a yellow conairy by the men in blue for exhaust noise in his r33 gts-t. It's an 3'' from the turbo down, hot dog resonator and cannon type muffler. My mate and I didn't believe it was illegal, because it still quite compares to the others around. We took a day off, went to EPA to test it out. The result was 93db !!! watdaaa !!! :)

Well, my question is, how do the others get away with their systems ?? or how many day off they have to take just to (1) remove the illegal ones => (2) fit back the standards => (3) show EPA => (4) fit back the illegal ones => (5) get pull over => and back to step (1). sighhhhh...

Actually, im looking for a legal 3'' system from the turbo down (with dump pipes) which produces reasonable power and note. But so far, some said it can't be legal with 3'' systems in the GTRs, because they are even noisier than the GTS-Ts.

Well, if any of you using a legal 3'' system, please reccomend me and how many KW should i get ??

THANKS !!!

can u get a silencer to pass the epa?

i got on my 3.5" hks stainless,

i duno how loud it is but got defected as well, but well, my mechanic passed me,

hehe

soo yea, u just need to know some ppl...

silencer helps. then take it off.

it depends what u mean by silencer, it has to be permanent so nothing that just bolts in, ie those silencers that come with xforce exhausts wont do the job.

if u weld in another muffler that makes your exhaust quiet then that is fine.

if you dont like that idea ^^^^

buy a second hand standard exhaust from cat back and if you get done then just swap over exhausts for the epa and swap it back wen you get home

you can do that as much as u like, i do!! bummer is the epa guys no me pretty well now.... say hi for me next time your down

Had my R32 tested just recently. I've got 3 1/2 from turbo back, with cat. Thought it might be wise to put the silencer back on before I drove it up there. Pulled in the drive and the boys laughed at me.

So anyways, took to it to a mate and we put on a standard exhaust from a car just in from Japan, went and got it tested and just passed with 91. Now, what they also take into account is the engine noise. What mods has he had done under the bonnet?

Had my R32 tested just recently. I've got 3 1/2 from turbo back, with cat. Thought it might be wise to put the silencer back on before I drove it up there. Pulled in the drive and the boys laughed at me.

So anyways, took to it to a mate and we put on a standard exhaust from a car just in from Japan, went and got it tested and just passed with 91. Now, what they also take into account is the engine noise. What mods has he had done under the bonnet?

Yep, many moons (about25 years) ago I was pulled over by the epa and had my 4 cylinder morris tested,,they put a mic on the exhaust and one on the engine,,

now my car at the time had twin 1 and 3/4 inch SU's and it blew a healthy 115 db,,

they told me to get it fixed and get it retested or i would be fined,, so I put on a stock exhaust, took it down, they put a mic onto the exhaust but not the engine, and then passed the car,, two weeks later I got the fine in the mail anyway,,

pr*^#s,,,

cheers

John

My car has a 3" cat back exhaust, i think its by Fujitsubo or someone. Anyone know if it'll be under 92db? Can i get it tested without fear of being defected?

Whom ever does the test can't legally book you. You can drive in and have the test done and drive out, all they can do is reccomend you have it done. The booking has to come from the Police or EPA equilvalent.

p.s. you won't pass.. :P

Edited by Savage Bliss

There's a method of passing noise tests at defect stations involving steel wool and chicken wire.

You have to be careful about how you mount the wire in the exhaust though. One of my friends tried this when he had been pulled over and had been told to go to pineapple street (Lancer Gsr), revved the car too hard on the way there and shot the wire out the exhaust. Ended up pulling around 95db from memory.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...