Jump to content
SAU Community

Recommended Posts

Here's just something I've compiled from various threads around the forums of people getting cars serviced .... don't have to get all of it done, but does give you a rundown of what to expect I guess.

Where to go ?

Hills Motorsport in Castle Hill .... As for Mark

Revrite Performance in Silverwater ... Ask for Fred.

What to get done ?

Change Timing Belt

Replace Water Pump

Replace Cam Belt

Replace Thermostat

Gasket Paper for the Thermostat Housing $4 and the goo stuff $5 maybe

Change oil (Royal Purple) and replace oil filter

Change diff oil

Replace Fuel filter (code Z200)

Replace Spark Plugs with NGK BCPR6E (WITHOUT the -11 on the end, meaning a 0.8 mm gap rather than 1.1)

Get injectors cleaned/tested

Get the Block Powerflushed and the Radiator Rodded

Flush your brakes and Mastercyclinder

Handbreak adjustment / calibration

Replace power steering fluid

sair line hoses

radiator and heater hoses

full wheel bearing and bush lube

cv joints re packed

uni joints greesed

door hinges and locks lubed

All Belts and Fluids

Brake Pad Check

Clutch Check

REPLACE WATER PUMP

Replace Air Filter

Fuel Filter

Fuel Pump Pressure check

Fuel Line inspection

Brake LIne inspection

Radiator Flush

Alternator Check

Battery Check

Computer Diagonistic/Adjustment

Link to comment
https://www.sau.com.au/forums/topic/10872-full-service/#findComment-178966
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...