Jump to content
SAU Community

Recommended Posts

That's an offensive cost to the environment. Future archaeologists will be able to identify a "Vista Upgrade Layer" when they go through our landfill sites.'"

The sad part is thats probably true. However a lot of people do recycle machines, theres a company in the hills that takes old pcs (pentium 3s etc) fixes them up so they can get on the internet and do word processing and sells them for next to nothing. A P3 is really all you need to do 80% of office tasks.

Edited by Rolls

the UK Green Party are a bunch of uneducated freaks .... what DRM has to do with anything whatsoever is beyond me .... and the claim of people dumping old monitors - this has nothing whatsoever to do with Vista lol

hi man,

AVG is good Spybot is good

personally i used Active Virus Sheild from AOL and kapersky

http://www.cpuid.com/cpuz.php that will tell you all sorts of good information about your pc including how many ram slots you have

forget about upgrading your laptop, period. They are notoriously temperamental, and you will require specific model and spec ram chips from the supplier that built the laptop - and these are normally 200% - 300% the price of generic PC ram.

hey guys, how can i find out how many RAM slots i have in my laptop?

also, what do people think of AVG anti virus, Spybot and Sygate firewall????

I used all 3 for ages, and think they are great as they are free to use and catch 99% of stuff.

Currently though ive switched to Bitdefender as i thought avg was letting something through...

Bitdefender was my choice amongst the highest rated ones as it has the option to scan fast like AVG, or do a full or deep scan like Kaspersky, NOD32 etc...

It also has an included firewall, spyware and malware package in the 1 program. Saves me updating the 3 programs u listed, then scanning each.

****************

ATM i cant be farked figuring out why vista wont run on my pc. Memtest has no errors, and nothing is oc'd.

I think it must be the way ive got my hdd and dvds setup...

DVDr is pri ide drive

DVDrom is the Pri. ide secondary

Raptor (boot drive) is in sata2 -port 1

Seagate (storage) is in the sata2 - port 1

I think vista cracks a shit if it aint on an ide slot....need to keep researching....

for now im having fun, as ive got Ubuntu dual booting with XP. Planning on seeing how Beryl goes, and what else i can get going on linux...

I have Vista running an a SATA drive no problems.

I would definitely not run your DVD burner on a primary IDE port - put the Burner as Secondary master, and the DVDROM Secondary slave.

i forgot to mention before Active Virus Sheild is FREE also

http://www.activevirusshield.com/antivirus/freeav/index.adp?

*Powered by Kaspersky Lab, one of the largest anti-virus providers, worldwide.
Edited by Madaz
I have Vista running an a SATA drive no problems.

I would definitely not run your DVD burner on a primary IDE port - put the Burner as Secondary master, and the DVDROM Secondary slave.

isnt it better to run each on a separate ide port, not master/slave on the 1 ide slot?

Any difference to read write times when copying / writing from a disc to another?

black32 - I have always run DVD/CDRoms and Burners on the same ide ribbon and don't notice any speed issues - I have always done it this way. The read/write speed of the drives themselves is by far the limiting factor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sorry to dig up an old post, these seats do not sit inline with the steering wheel so expect them to be offset towards the door. Also they sit a lot higher than the factory seats. There is a datasheet available online that confirms this. Can also advise be careful who you purchase from if you get them from a distributor in Australia, the company I purchased from in Sydney is no longer listed as a Bride distributor and I understand why, there was zero support from them.
    • You weren't kidding about the long block, what a difference it made!! I fixed every dent almost and all of them except for one and it feels 100% smooth on the others! I just need to fix one up and put some guide coat. Thanks a lot, that was game changing and time saving. 
    • I got a quote to refurbish some BBS look-alikes -best part of 2k. I had some alloys sand blasted - bad idea, in retrospect. Had to wear gloves to handle them! I had them powder coated to protect the rim. Rather than sand blasting, I recommend hydro blasting (blasted with micro-fine glass beads carried in a water stream). I had a set of TRX rims done recently for only about $200 total.
    • As title, selling some OEM r32gtr parts: all parts are in great condition despite age and still functioning (taken off working car) Intercooler + Piping Kit: 400 OEM Coilovers: 450 OEM Exhaust: 450 OEM Airbox: 550 Front Pipe: 450  Nismo Floor mat: 300 Happy to send more photos / any info needed cheers Prefer local meet up in Sydney, based around 2067 but happy to move. 
    • Hell yeah. Glad to see it’s closer to the road. 
×
×
  • Create New...