Jump to content
SAU Community

Recommended Posts

That's an offensive cost to the environment. Future archaeologists will be able to identify a "Vista Upgrade Layer" when they go through our landfill sites.'"

The sad part is thats probably true. However a lot of people do recycle machines, theres a company in the hills that takes old pcs (pentium 3s etc) fixes them up so they can get on the internet and do word processing and sells them for next to nothing. A P3 is really all you need to do 80% of office tasks.

Edited by Rolls

the UK Green Party are a bunch of uneducated freaks .... what DRM has to do with anything whatsoever is beyond me .... and the claim of people dumping old monitors - this has nothing whatsoever to do with Vista lol

hi man,

AVG is good Spybot is good

personally i used Active Virus Sheild from AOL and kapersky

http://www.cpuid.com/cpuz.php that will tell you all sorts of good information about your pc including how many ram slots you have

forget about upgrading your laptop, period. They are notoriously temperamental, and you will require specific model and spec ram chips from the supplier that built the laptop - and these are normally 200% - 300% the price of generic PC ram.

hey guys, how can i find out how many RAM slots i have in my laptop?

also, what do people think of AVG anti virus, Spybot and Sygate firewall????

I used all 3 for ages, and think they are great as they are free to use and catch 99% of stuff.

Currently though ive switched to Bitdefender as i thought avg was letting something through...

Bitdefender was my choice amongst the highest rated ones as it has the option to scan fast like AVG, or do a full or deep scan like Kaspersky, NOD32 etc...

It also has an included firewall, spyware and malware package in the 1 program. Saves me updating the 3 programs u listed, then scanning each.

****************

ATM i cant be farked figuring out why vista wont run on my pc. Memtest has no errors, and nothing is oc'd.

I think it must be the way ive got my hdd and dvds setup...

DVDr is pri ide drive

DVDrom is the Pri. ide secondary

Raptor (boot drive) is in sata2 -port 1

Seagate (storage) is in the sata2 - port 1

I think vista cracks a shit if it aint on an ide slot....need to keep researching....

for now im having fun, as ive got Ubuntu dual booting with XP. Planning on seeing how Beryl goes, and what else i can get going on linux...

I have Vista running an a SATA drive no problems.

I would definitely not run your DVD burner on a primary IDE port - put the Burner as Secondary master, and the DVDROM Secondary slave.

i forgot to mention before Active Virus Sheild is FREE also

http://www.activevirusshield.com/antivirus/freeav/index.adp?

*Powered by Kaspersky Lab, one of the largest anti-virus providers, worldwide.
Edited by Madaz
I have Vista running an a SATA drive no problems.

I would definitely not run your DVD burner on a primary IDE port - put the Burner as Secondary master, and the DVDROM Secondary slave.

isnt it better to run each on a separate ide port, not master/slave on the 1 ide slot?

Any difference to read write times when copying / writing from a disc to another?

black32 - I have always run DVD/CDRoms and Burners on the same ide ribbon and don't notice any speed issues - I have always done it this way. The read/write speed of the drives themselves is by far the limiting factor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Steam valve seals are usually responsible for cold start smoke, it goes away once engine warmed up. Disconnect it let engine breathers and let it breath freely, see if problem goes away after a short drive. Also check to make sure engine oil drain pipe is not blocked or kinked. 
    • Haha thanks! Yea I'm moving over from 2x 1000cc jets pre throttle over to 6x 190cc direct port jets and 1x 500cc pre throttle jet.  Direct port comes with all the advantages you would expect, except that pre throttle does cool down IAT'S more. That's why my direct port nozzle placement is closest to the plenum as possible in the runners to allow the air more time to cool before being sucked in. I'm also putting that one 500cc pre throttle jet to help with more cooling. It's a hybrid system. There's a lot more advantages to moving over to a PWM solenoid with a constant pressure system vs my old PWM pump setup, but I'll get more into that once I'm done converting everything over. The ricer in me is excited to see SS tubing all over my manifold though!
    • Very cool, see what I did there? 🥲 Wild WMI setup, first I've seen where it's on each cylinder runner, usually I see a single jet pre throttle.
    • Welcome mate. What type of work were you looking at getting done? Majorly of decent skyline workshops are in the SE.
    • Thanks mate, haha that's it ey, no more boosters and what not, should make for a good time
×
×
  • Create New...