Jump to content
SAU Community

Recommended Posts

this is a bit diff to what i thought, but easier to manage whilst vehicle is in motion i would believe

http://cgi.ebay.com.au/Asus-EEEPC-Solderle...%3A1|240%3A1318

Can you get an external HDD for these, or am i missing the link between HDD and SSD

this is a bit diff to what i thought, but easier to manage whilst vehicle is in motion i would believe

http://cgi.ebay.com.au/Asus-EEEPC-Solderle...%3A1|240%3A1318

Can you get an external HDD for these, or am i missing the link between HDD and SSD

it has usb ports so you can get external hdd's but you dont want a hdd in the car due to g-forces and shock. ssd = solid state (no moving parts) and can tolerate a lot of shock. They also draw about 1 watt as opposed to the 12-20 watts of a laptop (2.5") hdd - thats one of the reasons the netbooks can get 4 hours of use. Some of them use standard hdd's on the 1.8" scale but these too still draw a lot of power.

That link is for putting the perspect touch sensor inside an existing 901 laptop screen - loads of people have been doing this but I think this is the first one I've seen which doesn't require soldering. SO very tempting, tho it would void my warranty....

-D

OK all you 4 eyed geeks out there ;)

I need to get serious about another build using decent gear without going over the top with price.

Input would be needed and appreciated.....here's a start:

Gigabyte EP45-UD3P M/Board...................$220

Intel Q9550 2.83Mhz CPU........................$413

Corsair Dominator DDR II 1066Mhz 4Gb.......$170

ATi Radeon HD 4850 1Gb.........................$280

Thermaltake 650W 'Q' Fan PSU.................$175

Samsung 2333 SW 23" LCD......................$290

Don't pay tax so these are all EX prices.......anyone do any better or suggest different setup?

Used for office work & video editing.........hence I normally run a Stripe Raid setup.

G-B EX58 DS4....................................$339

i& 920...............................................$469

4GB Kit(2x2G)DDR2 1066 Kingston.......$95

1GB 4850 Gigabyte.............................$287

Thermaltake ToughPower 600W...........$140

monitor personally im looking at this

21.5 “ 2ms HD WS Benq E2200HD Full HD.....$238

i was pretty sure not 100% sure just pretty that i7 uses either

all prices Inc. tax

this is what my mate gets at work

317986132.png

he gets to have a server on a 100Mb link to it too that he can just use to whore on torrents

/jealous

Weird - maximum I've gotten at Hostworks was about 70mbps on speedtest.net ;) .. That said, it does seem to depend on the time of day which suggests it may be a limitation of the testing server rather than Hostworks' connectivity though ...

I would be also be very careful of your friend advertising he 'whores torrents' on this server :)

sorry your right but for a little more than the dominator ram get some Gskill

4G Kit(2x2G) DDR3 1333 G.Skill NQ..............$215

you not going to overclock so you dont need heaps fancy ram Gskill will be quite fine

Steve, just checked out that GB EX58, it's 3 way, so would need 3 x 2Gb which may get expensive to go the i7 route.

Curious to know what the 1600mhz would cost?

Does your supplier issue proper tax invoices?.......otherwise no point if I can't claim the tax back.

Also the 600W ToughPower is noisy compared to the 650W 'Q' I think.

Hi Pete

almost the same as my setup except i run a 4870 vid card and asus m/board

i've had the 9550 running 3.0 ghz on air cooler for 6 months and it is magic!

I would go for a coolermaster tru power psu that has 5 year warranty

Steve, just checked out that GB EX58, it's 3 way, so would need 3 x 2Gb which may get expensive to go the i7 route.

Curious to know what the 1600mhz would cost?

Does your supplier issue proper tax invoices?.......otherwise no point if I can't claim the tax back.

G.Skill NQ 3x2Gb DDR3 1600mhz = ~$377(excl gst) and yes his supplier does issue non-dodgy tax invoices :huh:

that's good to know Adrian......because of work files & video work I won't be overclocking as I need it to run very cool & rock stable.

I know Antec also offer 5 yr warranty but apparently Thermaltake have just gone Life-Time?!

Haha, thanks for that Patrick.....problem with DDR3 is that it's still too dear compared to DDR2 so I have to decide whether to spend the extra $$ although the i7 over the Q9550 would be very nice.

that's good to know Adrian......because of work files & video work I won't be overclocking as I need it to run very cool & rock stable.

I know Antec also offer 5 yr warranty but apparently Thermaltake have just gone Life-Time?!

Haha, thanks for that Patrick.....problem with DDR3 is that it's still too dear compared to DDR2 so I have to decide whether to spend the extra $ although the i7 over the Q9550 would be very nice.

Unless you're running games, databases or doing hardcore rendering, its a waste. Stick with a quad core system and dual core ddr2, you'll get better value for that.

Incidentally re: EEE pc's, theres a new one coming out from Nvidia which replaces the i945 graphics chip with a 9300gm 3d accelerated northbridge.

Meaning the gfx card wont be neutered and will actually render HD properly. Interesting to note that they will keep the intel atom processor as the CPU, and that the 9300GM has integrated Phys-x capability (tho I cant see many games that use phys-x running nicely on the 9300, even tho it IS a step up).

I'll be keeping an eye out. Any excuse to put World of Warcraft on a netbook and run it across nextG is a good one. :huh:

-D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...