Jump to content
SAU Community

Recommended Posts

Hey guys, just posting up my bluebird to see what people will offer me,

im also open to swaps.

original owner had car dyno tuned n it made 278 on 11 psi, engine capable of holding 25PSI comfortably.

Car has Custom plates on it(JET FJ) Black on yellow

car has had over 40k spent on it.

List of Modes:

ENGINE

FJ20 Turbo built by V&E Rigoli in April 2004 done about (12000kms) since build.

Standar five speed Excedy Heavy duty clutch

Forged wiseco pistons, malloy rings, new conrods, crank shotpeened and balanced.

Hi-Flowing T3 Turbo built by Precision Turbochargers capable of 450hp.

Huge polished front mount intercooler

3inch stainless exhaust from turbo back brand new cat.

Microtech MT8 ecu and hand controller.

Turbosmart adjustable incabin boost controller.

Has 1 nissan GTR Fuel pump and lift pump, will sell with brand new Bosch 600hp pump and brand new carter black lift pump and Malpassi fuel reg i also have a solid 3/8 fuel line for fuel in-line.

The car runs 616cc injectors on the standard fuel rail

Pod air filter

EXTERIOR/INTERIOR

Custom orange paint

Custom front bar

Cosworth bonnet vents

Tinted windows

Custom leather interior With Skyline front bucket seats (seats, doors n roof trimmed)

Sparco leather steering wheel

Autometer monster tacho, boost gauge, oil pressure

17 inch gold lenso 7 spoke rims.

Two new tyres and two bold tyres.

Sound system

Kenwood cd player

7/10 kenwood speakers

2x6inch speakers

make me an offer n we'll go from there..

Untitled-1.jpg

JETFJRear.jpg

JETFJFrontRight.jpg

JETFJ.jpg

A11.jpg

A10.jpg

A9.jpg

A8.jpg

A7.jpg

A4.jpg

A2.jpg

A1.jpg

Looking to trade for R32 or R33,

but still open to other offers

Edited by AznBikerBoi
Link to comment
https://www.sau.com.au/forums/topic/108960-nissan-bluebird-fj20et/
Share on other sites

no i dont want to, thats why i said make an offer, obviously!!!

open to swaps!!!

$1500 then, as well it is only a blue bird...

That is why they ask for a price. To save people wasting YOUR time with stupid arse offers. Work out what you want for it, add $1-5k to that price, done, easy.

$1500 then, as well it is only a blue bird...

That is why they ask for a price. To save people wasting YOUR time with stupid arse offers. Work out what you want for it, add $1-5k to that price, done, easy.

ok personally i dont c the point of doin a price range thing, like i were to say, ok im chasing 7-13k, OBVIOUSLY ppl are gona offer 7k.

but im sure people are smart enough to offer abit more then 1500.

Put up some price. It's the rules. Your thread will be closed very shortly I'd say.

Common sense says you put up your higher preferred price and work your way down from there.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...