Jump to content
SAU Community

Recommended Posts

  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Well as ur gona find out soon enough, when things are'nt as simple as flat panels and u have tight corners to get around the fibres dont always wanna play ball n stay where they should. So after u finish laminating ur part you then put on a release film, then some breather (which basically spreads the suction around ur part and absorbs excess resin too) and then bag it. So what u end up with is the better part of 1 Bar of pressure all over ur part. For a flat panel what id do is have another flat surface that is waxed to put on top (make a sandwich of the laminate) and then add some weight on it, this basically gives u a thinner better consolidated laminate. The vacuum bagging method is great but it also means buying the extra's that go with it. (Release Film, Breather, etc)

Clearly money well spent if u wanna make trick bits. All the best !!! Make sure u use gloves n have some acetone handy to wipe up the spills.

cheers for the run through..

have you got any ideas on what materials are the best to use as a mold creator of complex items...

basically i was watching monster garage. they had a foam type composite that the guy cut up using a saw .. was light but hard, then he covered it in fibreglass to make the item.

i want something that i can manipulate then take the mold off that in fibreglass so you can produce the item..

does that make sense?

well in ur case if ur only makin some one off bits for a play around then you can use high density foam/ MDF/ wood but ur surface will have to be either painted n polished in the case of the MDF/wood or sealed in the case of the foam. The high density foam also disolves in acetone so be careful there.

This process will form whats known as a pattern and from this pattern u get ur mould and then off ur mould u get a part... to be really cheap n simple id go with the MDF, u also have patten forming clay... Look im sure there is alot more stuff out there that i dont know off, but to start with these are very do able options. Maksure ur mould is thick and rigid, use a lot of chopped strand matt to bulk it up....

yeah i think i saw that clay stuff at the fibreglass suppliers.. looks just like play dough...

do you need to seal that? or does the resin just not stick to it?

think i read somewhere last year that it will not stick to play dough .. might be the same for the clay.. cos it re-usable from what i read on the packet

welcome to the world of carbon, i'm willing to answer any questons people may have. I'm actually a composite technician and work with it everyday. i work at custom carbon here in brissy good ol vacuum bagging least you guys are on the right path... beware stuff ups are a plenty in the world of carbon. Good luck

yeah the website has been down for a while, the boss is getting it all redone

i been on his case about it, guess its done when its done.

what R33 stuff you want pics of? for R33 the moulds we have are

Modified blitz 400r full kit

GTSt bonnet series 1

GTR bonnet series 2

GTR front grill

GTR lower lip

Bootlid that sits flush with rear panels

pillar mount gauge holder

GTR wing just the blade

door sil panels

I'm pretty sure thats it i'll get onto the computer at work tomorrow and get some pics. and post them up whan i can.

Oh and craved you still have to wax mouding clay/ play dough or plasters or the resins will stick to them.

yeah the website has been down for a while, the boss is getting it all redone

i been on his case about it, guess its done when its done.

what R33 stuff you want pics of? for R33 the moulds we have are

Modified blitz 400r full kit

GTSt bonnet series 1

GTR bonnet series 2

GTR front grill

GTR lower lip

Bootlid that sits flush with rear panels

pillar mount gauge holder

GTR wing just the blade

door sil panels

I'm pretty sure thats it i'll get onto the computer at work tomorrow and get some pics. and post them up whan i can.

Oh and craved you still have to wax mouding clay/ play dough or plasters or the resins will stick to them.

are your products carbon overlays or pure carbon ?

Does anyone fabricate carbon front gaurds for R33 gtst's?

There is a magazine called performance build up's which has released a few articles on working with carbon/kevlar. That may help answer a few questions people have.

Does anyone fabricate carbon front gaurds for R33 gtst's?

There is a magazine called performance build up's which has released a few articles on working with carbon/kevlar. That may help answer a few questions people have.

refer to pics above

i found a company in japan that does them, but they were really expensive...around 2k each from memory

Yes, 2k is out of most peoples budget for gtst upgrades.Is the company called Bee-R?

I also heard somewhere about someone in SA that fabricates gaurds. Not sure if they are carbon or fibreglass. Have you heard of of anything along these lines?

Steve

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...