Jump to content
SAU Community

Recommended Posts

Selling because I have too many.

This Line is in very good cond and is virtually stock std.

Has original style exhaust , boost restrictor is still in , std airbox and interior and even has std radio cassette.

New $800 9 puck button clutch with uprated pressure plate was fitted 2 weeks ago.

Has a beautiful set of polished 18 x 9's with brand new OZ spec tyres on.

Has original 90K on the original 180 KMH speedo and the car drives very well.

Is one of the cleanest ones I have seen and is worth more than the asking price of $30,000 but as am in Perth it is difficult to sell.

Can get freight to Melbourne for $550 or Sydney is $660.

Contact [email protected]

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/10919-r32-gtr-1992-fs/
Share on other sites

Originally posted by Brody

Its people like you that make my life so hard. All day i have a consistant dilemma as to if i should loose the r32 gtst and get a gtr :D

Hehehehe , Lifes a bitch then you say stuff it , and buy a GTR.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/10919-r32-gtr-1992-fs/#findComment-179455
Share on other sites

Unfortunately insurance and /or finance seems to be the major problem.

Have had a few interested parties but no one has bothered to actually look at it.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/10919-r32-gtr-1992-fs/#findComment-181221
Share on other sites

Another pic.

if you are seriously looking for a good GTR that has been unmolested for prolly the cheapest price in Australia , this is worth the flight over.

Seems that no one in W Aust is looking for one atm.

Will chuck in airfare for any purchaser.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/10919-r32-gtr-1992-fs/#findComment-189923
Share on other sites

Yes

No , unless you class nismo front and rear lip and sideskirts as mods

Yes , bootlid and rear spoiler cos of slightly faded paint.

Where are you ?

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/10919-r32-gtr-1992-fs/#findComment-192080
Share on other sites

Guys Just like to add my two cents in.

GTR KEN is one honest guy. If he says the car is in excellent condition and without a doubt it would be.

Very honest guy and humble.

WHoever buys this car from him will not regret it and will only have years of enjoyment. :P

Link to comment
https://www.sau.com.au/forums/topic/10919-r32-gtr-1992-fs/#findComment-192544
Share on other sites

Originally posted by Simmo

OK, sounds good.

I'm on the east coast

I assume from what you have said the suspension is standard.

What tyres are on it?

......and the extra pics?

ta

Simmo

Send us your email addy, don't want to clog the forum with too many pics.

And you are correct it has std suspension.

Tyres are 235/40 x18 Nankang Ultra Sports ( true !! rofl ).

Basically they are the cheapest Aust spec tyres that were avaliable.

Funny thing is they actually work pretty good.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/10919-r32-gtr-1992-fs/#findComment-193554
Share on other sites

Originally posted by DR GTR

Guys Just like to add my two cents in.

GTR KEN is one honest guy. If he says the car is in excellent condition and without a doubt it would be.

Very honest guy and humble.

WHoever buys this car from him will not regret it and will only have years of enjoyment. :D

WOW , thanks Dr GTR

*blush , blush*

I try to be honest , not worth lying and stuffing people around.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/10919-r32-gtr-1992-fs/#findComment-193558
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks MBS206, i got that PDF but got abit overhelm with all the connections and tracing of wires. I wasn't expecting to plug the dash harness anywhere. i was just going to use my electronics jumper wires to plug into the right pins like ECU power, ecu ground, ignition trigger etc... I do have a few ratchet straps locking it down tight. Fire extinguisher ready and only a small amount of fuel at a time, enough to submerge the pump.
    • Thanks GTSBoy, i will do abit more digging. I am missing a blue relay near the ECU connector... so i will chase that up in the next few days as well  
    • https://yariksteel.ru/manual/R33/Skyline_R33_elektroprovodka.pdf   Page 18 should be what you want for the Dash Cluster wiring. Though, you don't need the dash plugged in to get the motor running. What you want is power as how GTSBoy said. You need to power the ECU. Find in the above link the ECU pin outs (Verify them before just connecting them up from things written on the internet). Find anything needing power, give it power, find anything needing ground, give it ground. Then give the starter motor power through a big cable, and bridge the solenoid on the starter straight to power too.  ECU will be on, and when you give the starter power, it'll spin the starter motor, and it should start. I also hope you have a proper stand, and not just the engine sitting on some wood. You will want it bolted down properly.
    • Hello everyone, I am happy to join you.
    • Whereabouts are you, that looks exactly like Akira's old car....
×
×
  • Create New...