Jump to content
SAU Community

Exhaust

Guest andrewjread

By Guest andrewjread,
in Western Australia

 Share

Recommended Posts

Guest andrewjread

Guest andrewjread

Posted
Posted

I know this is probab a common question but what would a 3" exhaust from the cat back roughly cost for a R33 and is this what I should get. I dont give a shit about brand names or noise....just performance.

Heres a hard decision. Should I fork out for the exhaust, or get some nice rims and tyres first. decisions, decisions....

Link to comment
https://www.sau.com.au/forums/topic/10961-exhaust/
Share on other sites
gtrken Grand Master

gtrken

Posted
Posted

Yes but without a bigger cat , either hiflow ( yes I know rev210 )or some larger flanges it is probably going to be a minimal performance gain.

I believe there is good gains to be made from a quality dump off the turbo.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/10961-exhaust/#findComment-179686
Share on other sites
gtrken Grand Master

gtrken

Posted
Posted

I would suggest saving up and getting it all done at once.

Doing it bit by bit will invariably cost more because some stuff will have to be done again ( placing on the hoist , removing pipes , replacing gaskets etc )

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/10961-exhaust/#findComment-179701
Share on other sites
gtrken Grand Master

gtrken

Posted
Posted

Depends where you go , Stainless or mild steel , mandrel or press bent, Tig welded or mig, show quality or whatever.

Confused you enough yet??

Search some past recent threads in the W A section re. exactly the same thing.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/10961-exhaust/#findComment-179714
Share on other sites
GTS-t VSPEC Grand Master

GTS-t VSPEC

Posted
Posted

For a non-brand name system, then your looking at about $1400 for a complete system, but shop around and you can save yourself some money.

I have just made my system very hiflow, and the car feels the better for it. Definately do it all at once, just keep saving your money.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/10961-exhaust/#findComment-179750
Share on other sites
rob77 Veteran

rob77

Posted
Posted

I have an jap made apexi N1 system (its not an apexi and doesnt wear the same price tag) Jeff Ash from c-red can organise one for you, about $1k from the cat back. I've taken beeble for a drive and he reckons they are tops as. Good looking unit and the in car noise is quite minimal, plus you should pickup around 15kw at the wheels. Rev210 went to quickfit exhausts in morley and they did a dump+front pipe for around $400, so once thats all on expect maybe a 20kw @ wheels gain, plus a tad more boost.

Link to comment
https://www.sau.com.au/forums/topic/10961-exhaust/#findComment-179900
Share on other sites
int21h Community Regular

int21h

Posted
Posted

I need some help with my exhaust parts.

I have a cat-back (i think) kakimoto exhaust seen here:

http://www.perfectrun.com.au/performance%2...fflerRslash.htm

You can see the 2 bits there, they are both joined, so i have 2 mufflers.

Then the pipe goes to the a little round thing where it appears the o2 sensor is (I dunno what its called) and then it goes to the turbo.

I want to put the front pipe + cat shown here

http://radium.highway1.com.au/parts/

Do you guys think it will fit, work and make a difference?

Link to comment
https://www.sau.com.au/forums/topic/10961-exhaust/#findComment-187068
Share on other sites
GTS-t VSPEC Grand Master

GTS-t VSPEC

Posted
Posted

Cat? That looks like a cat remover to me:p

It won't necessarily fit, but could be easily joined by any of the local exhaust shops. I would remove the centre muffler to give it better flow and better noise. It will definately make a difference.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/10961-exhaust/#findComment-187687
Share on other sites
adam 32 Grand Master

adam 32

Posted
Posted

unless you buy a completely stock car, alot of tyhe imports have these small mods done to them, exhaust, rims, pod filter etc. i bought mine when it had been modified to all hell and although a few parts have broken or fallen off the value cannot be argued. my cars got an apexi N1 with 3" off the turbo and 4" cat back, very nice exhaust.

Link to comment
https://www.sau.com.au/forums/topic/10961-exhaust/#findComment-189389
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Rusty roof repair

      By PranK · Posted

      So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • PranK
      My BMW 335i

      By PranK · Posted

      Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • GTSBoy
      My BMW 335i

      By GTSBoy · Posted

      A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • soviet_merlin
      My BMW 335i

      By soviet_merlin · Posted

      You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...