Jump to content
SAU Community

Recommended Posts

OK guys ive got around 2k to spend on my Skyline

Current engine mods that came with the car are:

3inch Stainless cat back

Pod filter (not heat shield)

BOV

Now this is what im looking at spending my money on. Please give other sugestions.

3'inch twin dump pipe from Bosimporting $450

3' catco cat (just the $280 one) from Bosimporting

Oil catch can $70

Just Jap intercooler and kit $550

Boost gauge $70

This totals around $1400 plus freight.

Other things i was thinking about getting are.

A box for my pod with CAI setup

New fuel pump Bosch 040

Please give ideas

Thanks :)

Link to comment
https://www.sau.com.au/forums/topic/109648-spending-2k-on-basic-mods/
Share on other sites

if you are purcashin from bos (spilt dump pipe)-make sure the sensors on the pipe have been relocated as his first batch had problems.. Not to sure if he has fixed it or not yet..

Or i would purchase CES spilt dump pipe.. Costs a lot more, but probably worth it..

Why do you need a catch can right now?? You arent gettin any detonations right??

So i would finish exhaust off from turbo back, with hiflow cat.. I would also get cam gears(exhaust)..

Front mount, heatsheild for your pod (i might be sellin mine in a months time or so as i wanna get a carbon fibre one lol), then boost controller.. Also a new fuel pump will help!!

get a power fc and tune it..

Then if you got money left over, i would then buy small things, like boost guage etc etc..

thats all you bascailly need to get 200rkw..

Edited by siddr20

Why do you need a catch can right now?? You arent gettin any detonations right??

So i would finish exhaust off from turbo back, with hiflow cat.. I would also get cam gears(exhaust)..

I was going to get a catch can just because there cheap and i beleive it stopes all the crap going into your intake?? There is no detonations.

With the cam gear would i need a after market computer? if not would i need to get the car on the dyno to tune it with the cam gear?? where can i get a cam gear from?

My idea is to get all the mods done up towards getting a Power FC. As i cant afford a Power FC now and tune.

Cheers.

I would buy a stock airbox with a decent panel filter to replace the pod filter. Pod filter is going to cost you performance in terms of day to day driving.

A guy on this forum has made up some boxes that fully seal the pod up, and the air is fed through the stock snorcle. There around $120 each... This is what i was thinking of getting. i guess it would be similar to the stock box and panel filter?

^^ yup thats what i got, from mr_crust.. usin stock snorkle..

you can get cam gears anywhere.. www.nismo.com.au justjap.. any sponsers..

It will be tricky to put in yourself, so when you are ready for powerfc tune, get that mechanic to put it in for you..

However theres a few threads on here about it..

It does gain 10-15kw.. so huge power increase -- i have been told.

if you are purcashin from bos (spilt dump pipe)-make sure the sensors on the pipe have been relocated as his first batch had problems.. Not to sure if he has fixed it or not yet..

Or i would purchase CES spilt dump pipe.. Costs a lot more, but probably worth it..

Why do you need a catch can right now?? You arent gettin any detonations right??

So i would finish exhaust off from turbo back, with hiflow cat.. I would also get cam gears(exhaust)..

Front mount, heatsheild for your pod (i might be sellin mine in a months time or so as i wanna get a carbon fibre one lol), then boost controller.. Also a new fuel pump will help!!

get a power fc and tune it..

Then if you got money left over, i would then buy small things, like boost guage etc etc..

thats all you bascailly need to get 200rkw..

The above makes a lot of sense. The key is in fitting a Power FC, freeing up of exhaust and a suitable boost controller. I'm not sure what type of turbo impeller you have (ceramic or metal),metal is another key in this department as running over 1 bar with ceramic spells trouble. You will need metal impellers if running over 1 bar. Of course a larger intercooler would be nice. But as we know with Skylines they can suck up a lot of moola ($$$)

If you have stock turbo this is all you need!!

Intercooler $550 or go R34 SMIC for under $200 (if plan for bigger things later go the FMIC)

3" Dump/front $250 or pay extra to go split

high flow cat $180 (BATMBL Catco 3")

Boost controller $30 (from forums)

Stock BOV $30 (sell your aftermarket one for $)

Stock Airbox & Snorkel $50

High flow panel (pipercross) $60

Sell your POD

Raise boost to 10-11psi.

Buy PFC $1000

Tune $300-$400 (get the tuner to do one power run on base map to see that is running rich, or check fuel rail pressure to ascertain condition of stock pump, before he gets down the track of tuning) Stock fuel pump should be ok!

You will net about 180+rwkw of very nice responsive power without drawing attention to yourself.

All up about $2-2.5k

Edited by benl1981

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...