Jump to content
SAU Community

Yet Another Stalling Problem...

Johnny Cash

By Johnny Cash,
in General Maintenance

 Share

Recommended Posts

Johnny Cash Experienced

Johnny Cash

Posted
  • Author
Posted (edited)

Meh, im putting my girl up for sale anyway - let the buyer deal with it.

I have noticed that it does it most often at low speed, in the first couple gears (when clutching), and when turning or just after turning. Maybe my power steering pump is sapping too much juice, or the aac screw needs to be adjusted to allow more revs...

Edited by Johnny Cash
Johnny Cash Experienced

Johnny Cash

Posted
  • Author
Posted

I've heard rumours along the wire that a Throttle Position Sensor (TPS) can also be the culprit for an idle stalling problem. How do I go about playing with and/or replacing this?

I'll run a search, cos I know that's normally people's first answer (and it's lots of help, by the way... NOT!)

Johnny Cash Experienced

Johnny Cash

Posted
  • Author
Posted

I might be on the trail to finally finding the gremlin. Have received reports that the TPS wouldn't be responsible for all of the things that I'm experiencing. It's more attributable to a sticking throttle body butterfly than a TPS.

So the next step (in this epic saga) is to remove the throttle body, and clean it like nobody's business...

I'll be sure to report in with the results - stay tuned.

7yphon Experienced

7yphon

Posted
Posted

Have you tried using another AFM I had this problem after installing the new Turbo was shitting me to tears trying to save it at lights all the time, I have a mate who owns a skyline and he just put a RB25 in his 4 door so weee spare AFM for the 20 anyway we put it on and presto fixed I dont get much stalling now but I think the rest just means a good tune

R32FOURDOOR Collaborator

R32FOURDOOR

Posted
Posted

Ok guys i know how to fix this issue.

I tried everything to fix this problem on my R32

What i did was:

- Changed TPS

- Cleaned ACC valve

- Changed AAC valve

- Cleaned AFM

- Changed AFM (tested with RED top and SILVER top engines)

- Changed fuel filter

- Changed oil

- Played around with the idle screw

- Cleaned out throttle body+butterfly

- Cleaned plugs and re-set em

- Checked for vacume leak

NONE of this worked at all!!!, i was spewing.

But finally i was looking around the engine bay and spotted the

COLD START SOLENOID.

I got a new Cold Start Solenoid from my mechanic and it was fixed!!!!!

Finally!!!!!.

It doesnt hunt for revs anymore, and it doesnt idle high.

It purrs like a kitten.

PS: I talked to my mechanic and he said that skylines engines are pretty prone to stuffing up the Cold Start Solenoid.

This would be ur problem too. Id start there ASAP cos you dont wana go shitten around trying stuff that dont work, like i did.

Hopes this helps you guys,

Matt

  • 2 weeks later...
Johnny Cash Experienced

Johnny Cash

Posted
  • Author
Posted

I've fixed the stalling problem!!!

It was the blow off valve. Which is very strange, cos the blow off valve I had on it was the Greddy Type S, which was being plumbed back just like the stock one. Maybe it was blowing-off too early, too late, too much, too little, too who f*cken knows...

The good news is she's not stalling anymore, and I'm smiling again!

R32FOURDOOR Collaborator

R32FOURDOOR

Posted
Posted

JC_R32

The cold start solenoid is located under the intake plume cross over pipe (between the intake and the rocker cover) you may need to push some wires/pipes out of the way. Its a square thing with tubes going into it.

I got a brand new one from japan through my mechanic that cost $190. could try and get a second hand one but usually they are f**ked with the same problem

JC_R32 Contributor

JC_R32

Posted
Posted

Cheers R32FOURDOOR..

I Didn't get chance to check forum on weekend, so in the mean time, I did something else.

I reset my computer by disconnecting the battery and pressing the brake a few times (to clear any remaining volts) then plugged it back in... I couldn't tell if it solved the cold start problem, but it doesn't seem to be rev hunting at idle anymore.. it's actually quite smooth...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      Stagea 260RS seats

      By ARB26 · Posted

      Hey Nismo, any chance in the world you still have these seats?
    • Lithium
      Forced Performance Hta Turbos

      By Lithium · Posted

      I'd say closer to OG GTX3582R, just smaller trim - so 59mm inducer/82mm exducer as opposed to 62/82 for the first gen GTX3582R. Yeah EFRs were boss, the EFR8474 is still an absolute beast and it perplexes me that people still go to things like Turbosmart/Garrett etc when the results people are getting with those are pretty unremarkable compared to what you could get with a turbo available well before those options came out.  DriftSquid (I think) "upgraded" from an EFR9174 to a Turbosmart turbo and promised a comparison video - and kinda shuffled awkwardly and did a bit of diversion from the fact that they didn't get any improvement going to the currently massively hyped brand of turbo from a turbo that was a bit of a frankenstein that had been well superceded in it's own range before the Turbosmart unit he put on there even came out. I suspect the EFR would outperform most Xonas for what a lot of less-insane RB owners would go for, in the 400-600kw range but the Xonas are looking hard to beat up to maybe in the mid 700kw range at this stage- basically where EFRs don't really reach, and before the Precision turbos take over.  What the Xonas do well in the "EFR range" is be easier to package etc, and work very well if a divided housing doesn't suit your application.  
    • WMDC35
      Tomei gasket

      By WMDC35 · Posted

      Are you sure the gasket is blown? What are the issues? Thermocure is the only flush I've seen do anything with rust, very impressed with that, Prestone, rust will be by the pool having a cigarette.  
    • MBS206
      Tomei gasket

      By MBS206 · Posted

      And since the flush you have a blown head gasket? Have you lifted the head off yet?
    • GTSBoy
      Hr34 fuel pump not turning on

      By GTSBoy · Posted

      The answer is to get a hold of the wiring diagram, work out what voltage is supposed to be where, when, and then work out why it is not there, then. I can't speak to the HR34 stuff, because I have never paid any attention to the NAs. There is a possibility that the turbo diagram will help, but it could also be different - depending on whether there is an FPCM on the NAs.
×
×
  • Create New...