Jump to content
SAU Community

Recommended Posts

Im getting 4 new K104's put onto my Stagea this weekend, $800 all up fitted balanced etc, for 235/45/17's onto my new R34 GTT rims - Im in SA by the way.

How long (ie kms) would a set last for? My Stagea isnt a daily driver, and when driven is usually in high density areas..... ie city driving. The Stagea is a heavy car, around 1900kgs with me driving it and fully fuelled - so how much PSI should be in each tyre?

For such a heavy car the K104's are the wrong load rating.

U will need the K107's. Check with the tyre shop who is supplying them.

For such a heavy car the K104's are the wrong load rating.

U will need the K107's. Check with the tyre shop who is supplying them.

Oh? ok, I think the car is around 1650kgs standard. And I know that a Stagea driver in Melbourne is using these hankook 104 tyres on R34gtt rims at the moment and says they are fairly good.

Plus the 104's are load rating 97Y I believe, whereas the basic tyres on my car atm are 92Y load rating, and it was given a road worthy certificate (in Qld when I bought the car) based on these current Nankang tyres.

The K107's are 94Y rating... so what is best? low Y or high Y rating? from what I understand the higher the Y the bigger the load capacity per tyre, see http://www.michelin.com.au/tyres/tyreBasics_speedRating.asp

At the end of the day the Stagea weighs in similar to a VS wagon, or a Magna wagon, so Im sure the 97 rating is aok. Plus from what Ive read they are worth the cash, so Im getting them anyways (plus my budget is a max of $200 per tyre, for 'performance' tyres).

So..... what PSI should I have in the tyre?

Cheers for your information - Brendan

Edited by Tangles

I'd put them on.

I love them. I have travelled a lot of ks on my K104s.

They grip very well.

Tangles, you wont be dissappointed.

Especially considering the price.

If you are putting on 235 17s, let me know.

I'll get you a decent price over here in Mitcham.

BASS OUT

Cheers fellas (by the way Im in Adelaide, so Im not sure our Mitchem here near Unley is the place you mean Bass Junky).

http://www.hankooktyre.com.au/v2/products/...ch=uhpt&id=1088

K104's for 235/45/17 stated as 97Y

I already bargained the shop down a little in price; Im happy (sort-of) to fork out $800 for my first set of 17's provided they look phat on my porky-wagon, perform very well, good value for money, and last me a long time - I drive less than 8000kms per year.

The tread pattern seems fairly aggressive to me, and they have had good reviews here on SAU........... but it comes down to psi also at the end of the day, so that they perform and last well. I will slowly be adding SK's suspension parts over time, although I wont be lowering the car via springs/shocks. At this stage adding swaybars & castor, and will add subframe alignment kit & camber when I can afford to.

Cheers, Brendan

Edited by Tangles
about $185 each....

Good pricing.......

I probably could have rung around more places and got them slowly down a bit, but how far do you go?!

Im sure they will be worth every dollar..... I hope. Im thinking start off with 36psi in each tyre and see how they wear and handle.

Never had 17inch mags before, cant wait to see how the GTT rims & 235wide K104 tyres look on the swett-as Stagea RB25det-smokin station wagon. :happy:

Cheers to you all, go the Crows.

Brendan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...