Jump to content
SAU Community

Recommended Posts

Hi Guys,

As you can see that im selling a bit of stuff. I am giving the garage a bit of clean so selling heaps of parts:

1. Airbox for POD - $60 - shields pod from heat in engine bay. - SOLD -

2. Turbosmart BOV Type II Veeport - $120 each - SOLD -

3. Standard R33 Coils x 6 - $150 lot - all working condition but not strong enough for high boost power output.

4. Aftermarket Ignition system for R32/R33. Purchase from SDU – runs coils on firewall setup and leads to each plug. Couldn’t get the setup working on the r33 but the r32 works well apparently, needs rewiring but easy to do. $300. Comes with coils and high-end ignition leads.

5. Cooler Piping for Hybrid Cooler - $250 comes without turbo smart bov. 2.5’ from Turbo to Cooler. 2.5 which turns to 3’ straightaway from Cooler to Throttle body. Special 180 degree bend to save on piping over the rocket cover to throttle body. Custom Piping made and includes all silicon hoses and clamp. Requires standard blow of value to adapt onto vehicle. It also has a turbo smart blow of value on the turbo to cooler pipe which is under the guard. This piping has big flow benefits than the standard equipment as top end power is improved dramatically due to the increased airflow diameter

6. Greddy Brand New Exhaust Cam Gear - $250

7. GTST Fuel Pump - $80

8. GTR Fuel Pump - $120 - (NA) Cant find it at the moment

9. Ignitor Module for r33 - $100

10. Malpassi 2:1 Regulator - $90 - SOLD

11. Plumbback BOV System for r33 - $40

12. Oil Catch Can - $80 - SOLD

13. POD Filters (3x 3'' & 1 x 2.5'' - $10 each

14. Standard Rear Exhaust (of a gts). $60

15. Standard R33 Clutch 80km - $70

16. GTR Standard Centre Gauges -$120

Im in melbourne and pm me for more details or if you want to purchase it. Prefer melbourne buyers but will send interstate. Im negotiable if your buying a couple of items.

Cheers

AK

post-4729-1142670877.jpg

post-4729-1142670922.jpg

post-4729-1142670944.jpg

post-4729-1142670962.jpg

post-4729-1142670984.jpg

post-4729-1142671030.jpg

post-4729-1142671054.jpg

post-4729-1142671074.jpg

post-4729-1142671098.jpg

post-4729-1142671127.jpg

post-4729-1142671153.jpg

post-4729-1142671230.jpg

post-4729-1142671273.jpg

post-4729-1142671298.jpg

post-4729-1142671316.jpg

post-4729-1142671338.jpg

Edited by WLD747
Link to comment
https://www.sau.com.au/forums/topic/110148-r33-garage-cleanout/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can you help!   Can you tell me a few places you got your Flex Fuel Kits installed in Sydney The only one I know of is Tunehouse. Thanks in advance!!!  
    • Yea my thought was tighter engine when hot is more load a poor ground connection can't take. On that note, I had time to check my driveshaft verical alignment tonight, it's +2 and -2 at either end, so thats perfect and how I had set it up last year. What would be the easiest way to check horizontal alignment between my diff and transmission? I can think of a few ways but they're all complicated and I feel like I'm overthinking it. I'm hoping it's that as I can't see any other reason why I have developed driveline vibration since I put the motor back in. 
    • Thank god. I thought I was the only one, nobody seems to mention this (cause nobody really goes this far in Sedan land). The car's track is 10mm wider at the rear, which explains why the rears sit a little further out for the same size wheels. There's not really many options in widebody land for sedans anyway - People will just use whatever came out of the box and then buy wheels/spacers to suit. To get it perfect you'll likely need custom wheels with custom offsets if you really want to get it perfect which is what I plan to do, but I also plan to utilize more of the inboard space for tyres at the rear... which is also something nobody ever seems to do.... OR my maths have failed me after 20,000 attempts and I'm about to make huge mistakes. 
    • What colour is that?  A mate of mine went red/black on his SLR5000 tribute recently also.  And yes, also glad to see this still progressing albeit slowly. 
    • found a company that makes a flat gauge face 3-d printed mounting base kit to eliminate the dished style gauges. if anyone else is looking to do the same https://www.dashfreaks.de/shop/flat-dials-holder-nissan-skyline-r34-gt-gtt/    
×
×
  • Create New...