Jump to content
SAU Community

Recommended Posts

hi, i just got my first car, 1994 Skyline R33 (not bad for a 16 year old)

But im not into racing, i just want to make my car like trick. I was thinking of gettin neons put inside the car and having them hooked up to missile switches and prehaps getting a GTR spoiler. Do you guys know where i would get a GTR spoiler and where would be the best place in brisbane to get my neons installed

Link to comment
https://www.sau.com.au/forums/topic/110203-modding-r33s/
Share on other sites

hi, i just got my first car, 1994 Skyline R33 (not bad for a 16 year old)

But im not into racing, i just want to make my car like trick. I was thinking of gettin neons put inside the car and having them hooked up to missile switches and prehaps getting a GTR spoiler. Do you guys know where i would get a GTR spoiler and where would be the best place in brisbane to get my neons installed

let me save you from looking back in 6months and you wondering why you would get neons in a car, DO NOT GET NEONS.

Get the car lowered, get some rims. That will make your car more 'trick' then neons on the inside hooked up to a missile switch (vl turbo special).

Link to comment
https://www.sau.com.au/forums/topic/110203-modding-r33s/#findComment-2030913
Share on other sites

personal i wouldnt do little things like that to your car. i did all that to my first car and got rid of it after afew weeks.... because for one it ruins the newness of the car and its more shit to break etc etc.

things like the GTR wing would be good moding, make the car look good etc.

with neons youll cop so much shit everywhere you go. you may pull more looks... but not in a good way, except from people under 18... they usualy think things like that are cool... not havin a go at ya... but im just saying usualy only under 18's like the rice factor...

and thats why ya see commo drivers have neons and cromies coz they pegg all the fat 16 year old biatchs...

spend that money on tinted windows, lowering to 11cm etc, the gtr wing etc etc

Link to comment
https://www.sau.com.au/forums/topic/110203-modding-r33s/#findComment-2030916
Share on other sites

yea, it was extremely low when i got it. it was actually under the legal limit and i had to get it slightly raised. I also had alot of problems when it was so low as i would hit gutters. But when i learn to get out of driveways without hitting the front bumper ill have it lowered again

I appreciate your honesty though. I don't wonna drive past another skyline and that person think that im a wanker for having neons.

So no ideas on where i'd get a GTR wing in brisbane?

Link to comment
https://www.sau.com.au/forums/topic/110203-modding-r33s/#findComment-2030928
Share on other sites

yea, it was extremely low when i got it. it was actually under the legal limit and i had to get it slightly raised. I also had alot of problems when it was so low as i would hit gutters. But when i learn to get out of driveways without hitting the front bumper ill have it lowered again

I appreciate your honesty though. I don't wonna drive past another skyline and that person think that im a wanker for having neons.

So no ideas on where i'd get a GTR wing in brisbane?

try posting that your looking for a GTR wing in the 'wanted to buy' section mate, other then that look at all the performance parts places on the net for prices.

Link to comment
https://www.sau.com.au/forums/topic/110203-modding-r33s/#findComment-2030930
Share on other sites

ok thanks. On my mags there is this discoloration, does anyone know if there is a way to fix it, because i can't seam to get it off.

There is also this orangy color on the exhaust under the word 'dunk'

post-27480-1142746625.jpg

post-27480-1142746990.jpg

Edited by R33_Rob
Link to comment
https://www.sau.com.au/forums/topic/110203-modding-r33s/#findComment-2030939
Share on other sites

neons = gay

for the wheels try autosol or purplestuff. these two are probably the best metal polishes on the market i use them all the time. oh yeah im a detailer so i have tried heaps of crap and trust me, if you want an awesome finish get purplestuff its expensive but

Link to comment
https://www.sau.com.au/forums/topic/110203-modding-r33s/#findComment-2034269
Share on other sites

Looking at the pic, it looks like the clear has come off, and the metal is oxidising now.

The metal polish or equivalent will make that area look nice, but the border between the clear and "no clear" will always be there until you get that rim repainted.

Link to comment
https://www.sau.com.au/forums/topic/110203-modding-r33s/#findComment-2034352
Share on other sites

What size tyre is it, and what do you keep it inflated to?

If your tyre is saggy, then it will expand out a little when you drive quickly... which will make the steering feel light. This, and I beleive the 4-wheel steering operates over 70km/hr?

Link to comment
https://www.sau.com.au/forums/topic/110203-modding-r33s/#findComment-2034855
Share on other sites

Rear adjustable castor rods ($100-150 on ebay or in trader section) will bring the rest of your tyre back to the ground.

I personally disabled hicas (4 wheel steer) due to wheel scrubbing on the inside of the rears. But its the negitive camber that does most of the damage.

Link to comment
https://www.sau.com.au/forums/topic/110203-modding-r33s/#findComment-2034969
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
    • I saw your intro update, are you sure you've actually had a starter motor failure? You mention it could be the alarm causing it. I'm assuming you've got a no start issue, but what are the exact symptoms, as there could be a few reasons it has stopped wanting to start.
×
×
  • Create New...