Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

motor is standard

-35/40 turbo

-Plenium

-700 cc Injectors

-LOL GAS

-ummmm yeah

i am trying to get the thing to hook up off the mark

im doing

1.8 60 foot times

pretty shit if you ask me

i am aiming at 1.5 even 1.4

im working on a new suspension setup

and the car needs higher gearing 4.86 or so as im only crossing the line at about 6000 RPM (need to be 7800 RPM)

then after that im gonna try and pull some weight out of it

get it to 1200 KG then run again

hopefully it should crack 10.6`s

Edited by MR331307

Nice one Moanie.

Adrian = boring :D:P

I wanted to come but I didn't want to jinx you all and bring the rain. I think I'll go again next week. In my dream I went and it rained again so that's a sign I think - it will rain every time I go or say I'm going. :P

yeah, I woul have loved to have improved my times with a couple more runs. I thought I could have gotten another three runs in at the end of the night and made it 10 runs for the night :P

Well doneMoanie and Adrian. Best of luck in Qld on Saturday Mr Happy Happy Gas.

Well done also to Jason with the 11.3's :D

Yesss!!! well done jason :) and nice to meet you :(

hahah.. charlie... i reckon!!! the official said 2 more runs for sure! then that damn rain came down!! oh wells.. i got 7 runs all up so i'm happy :)

and i swear when you said you had a mitzu, that you were going to be in an old rickty 4 door thing! LOL!




  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...