Jump to content
SAU Community

Traction

daleb4u
 Share

Recommended Posts

daleb4u Enthusiast

daleb4u

Posted
Posted

Hey Guys

I have a GTS-T Skyline, With and ARC intercooler, full exhaust BOV and After market adujstableSupspension (supposed to be worth $3000) I also suspect the car has cams and an Aftermarket computer but havn't had a chance to have a look as I just bought it.

I have stock wheels, When I take off ON A STRAIGHT LINE and put my foot down car has tranction however when I change into Second the car is almost side ways (which is quite fun but it just seems too easy for the car to loose traction)

Is there anything I can do to avoid this from occuring (besides taking my foot off the pedal),

Sorry if im asking dumb questions, this is the first turbo I have had but have driven a few previously and none have done that Esp on a straight line, could this be because of the power of the skyline ?? or the suspension ?? any feedback would be great.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/110486-traction/
Share on other sites
marchGTR Collaborator

marchGTR

Posted
Posted (edited)

I would suggest that your suspension is very firm and/or your tyres are not so good. check if they are damper adjustable, but even then if your suspension is adjustable and your tyres are no good you will not get good traction...so invest in some good rubber

Edited by marchGTR
Link to comment
https://www.sau.com.au/forums/topic/110486-traction/#findComment-2035456
Share on other sites
siddr20 Grand Master

siddr20

Posted
Posted

If runnin stock boost then 7psi at max...

heheh i got the same problem, around corners.. the back just kicks out like crazy!!

i say buy new rims, with atleast 9inch wide on the rears..

the 16s with 205s are just awful!!

why didnt nissan give us stock 17s or or just wider width..

Link to comment
https://www.sau.com.au/forums/topic/110486-traction/#findComment-2035966
Share on other sites
daleb4u Enthusiast

daleb4u

Posted
  • Author
Posted

Im not worried about the corners as that is excepted, its when im on a straight line, i put my foot down changed and 5 1/2 grand and as soon as i punched second the ass came out to the right. Its as if it was raining but it was dry as.

it could be the tyres as the car was sitting for a year and a half, without being driven so maybe the tyres got hard or something ..???

Link to comment
https://www.sau.com.au/forums/topic/110486-traction/#findComment-2036021
Share on other sites
scathing Grand Master

scathing

Posted
Posted
I have stock wheels, When I take off ON A STRAIGHT LINE and put my foot down car has tranction however when I change into Second the car is almost side ways (which is quite fun but it just seems too easy for the car to loose traction)

Is there anything I can do to avoid this from occuring (besides taking my foot off the pedal),

How about you stop "punching second" and bring the clutch up a little slower (or engaging the throttle a little slower) once you've selected second? What's wrong with backing off the throttle when you change gear, like you're meant to?

You're more likely to light up your tyres in first gear than second. Its simple physics. If you've got traction in first gear, then its not (in itself) a tyre / suspension problem. Its sounding more like the problem is you.

Aside from that, run a set of super soft tyres with low air pressure and dial your rear dampers as softly as possible. Check your wheel alignment. Turn down the power.

Link to comment
https://www.sau.com.au/forums/topic/110486-traction/#findComment-2046346
Share on other sites
Triskillion Collaborator

Triskillion

Posted
Posted
How about you stop "punching second" and bring the clutch up a little slower (or engaging the throttle a little slower) once you've selected second? What's wrong with backing off the throttle when you change gear, like you're meant to?

You're more likely to light up your tyres in first gear than second. Its simple physics. If you've got traction in first gear, then its not (in itself) a tyre / suspension problem. Its sounding more like the problem is you.

Aside from that, run a set of super soft tyres with low air pressure and dial your rear dampers as softly as possible. Check your wheel alignment. Turn down the power.

his right, i can choose to loose traction in first or not, but in the end im still doing the same speed

Link to comment
https://www.sau.com.au/forums/topic/110486-traction/#findComment-2046980
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • MBS206
      Starting again

      By MBS206 · Posted

      The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • MBS206
      What brakes on R34 GTT(Europe)

      By MBS206 · Posted

      Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
×
×
  • Create New...