Jump to content
SAU Community

Recommended Posts

Ive got a R32 GTR and ive taken out the ristrictor in the hose that goes to the boost controller solaniod but i was also told to join those 2 hoses together to get 15psi.. It works BUT like at 6000rpm its sometimes starts to make a limiter noise. could some one help me because my car is GOIN NUTS ON 15PSI :O

I was only running about 8-9psi before but now that little bit extra is awesome.

DO GTRS have a boost cut defender?

ANYONE?

Im only new to the forum so this is a pic of my car.

post-26787-1143156584.jpg

explain exactly what happens at this 6000rpm mark.

does it cut the power completely.. like is it violent?

is it like a rev limiter where it stutters and kinda back fires?

doest it keep reving up but kinda misses?

what happens to the boost gauge when this "CUT" happens? still sit at 15 or drop?

with more description and those answered, people can give you a better response as to what the problem is.

at the moment it could be..

AFM max

spark blowing out due to excess boost.

coil packs arc'ing out

etc...

I think that the fact that you now have about 2 x the boost you had before, you are blowing out the spark.

there are a few things you can try which will cost you nothing but some of your time.

1.) take out your spark plugs and gap them down to 0.8mm.

if they already are, drop them back to 0.7mm.

2.) with some electrical tape, tape up the coil packs. there is a guide on this in the maintenance section of these forums.

I did the above 2 points 2 weeks ago and my car revs out smoothly now.

mine is an rb20 but same edal.

runs a little more boost than stock.

I suggest you try the 2 things above as they are free and MAY fix the issue.

If you are in Sydney, I can help you do it if you like.

if they are anything like GTST's then yes they do.

Write it out 20 times..........

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

Half way there……………

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

THERE IS NO SUCH THING AS BOOST CUT

Hope you learnt a lesson, next time it will be detention for you

:O cheers :P

if you are running 15psi and stock ecu you will be encountering the STOCK EXCESS AIRFLOW protection. turn the boost down and try again, i would suggest around 10psi at the most. this should work around the excess airflow protection

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...