Rb26 Fuel Pressure Reg With -8 , Or -6 Fiitings For Stock Rail?

[Chris Wilson]

Does anyone do an off the shelf FPR that bolts to the stock steel RB26DETT rail and has a -8 or a -6 JIC fiiting on it for the return? Thanks.

[PHaT MR30]

don't reckon, thats normally left for aftermarket dual feed rails.....

[Sydneykid]

There is no pressure AFTER the FPR, only before it. So there is no need for screw on fittings. Unless it is rice factor.

cheers

[Chris Wilson]

I am doing the feed from the swirl pot and dual pumps in -8, and the return in -6 or -8 as i have a load of hose and fittings doing nothing, and the swirl poy I made has screw on unions, so i thought I might as well buy a reg with screw on return fitting as push on, but I take your point of course, thanks for the replies.