Dyno Results

[Absent]

Had my r32 GTSt dynoed the other day, disappointed with 137rwkw with 12psi, 3inch turbo back exhaust and an unknown chip in the ECU. The car runs pretty sweet through the rev range but will not idle and stall until the temp gauge is up then it idles at bought 1500. There is a build up of oil in the air intake aswell does this mean engine is on the way out? The engine is the red top RB20 with 140K on the clock. I have checked auxillary air valve, afm, idle speed controller any other sensors I should check. plenty of black s**t flys out the exhaust when on boost. What do you guys reckon is my car rooted

[Mr Italy!]

Do a compression test, that will tell you if the engines rooted or not.

The oil may not be from the engine, it may be the turbo oil seal letting go.

[ferni]

137rwkw sounds ok to me. If your happy with how it drives and pulls then dont worry about dyno figures...

As for the oil in your intake, maybe you need a catch can, maybe the engine is a little tired so you are getting a little blow-by. Doing a leakdown test will make you feel a little better knowing if your engine is ok or not.