Jump to content
SAU Community

Recommended Posts

now i was under the impression and was told that i had abs...

after a certain incident saturday ngiht when someone decided they wanted to turn fromthe left lane right and almost took the entire front of my car off my brakes locked up sending smoke everywhere... and then she didnt stop for ages but...

do the s1 r33 95's have abs??

if so what the hell happend...

now i have a flat spot on my front tyres and im not happy!!

Link to comment
https://www.sau.com.au/forums/topic/112290-s1-r33-brakes/
Share on other sites

Some do and some don't...I believe it was an option from the factory rather than std (my 95 series 1.5 doesn't have it).

If you pop the bonnet and there is no cube shaped device attached to the passenger side firewall of the engine bay then you don't have it.

Will try and get a pic for you....

Link to comment
https://www.sau.com.au/forums/topic/112290-s1-r33-brakes/#findComment-2070327
Share on other sites

If it does someone could have disabled it, Check the fuses and the engine bay and there should be a fuse that says something alone the line of tracktion or ABS. Also dont rely on ABS for breaking because not many ppl know this but ABS is to help with turning, so if you find someone pulles out in front of you instead of just slamming on the brakes turn away from them also. Just my 2c

Link to comment
https://www.sau.com.au/forums/topic/112290-s1-r33-brakes/#findComment-2070333
Share on other sites

cool thanks guys...

i wasnt relying on it and there was no way to turn because there was a huge island with a sign that i almost missed to so natural instinct slam into second and slam brakes...

ill look tonight when i get home...

but thanks :O

Link to comment
https://www.sau.com.au/forums/topic/112290-s1-r33-brakes/#findComment-2070351
Share on other sites

Also dont rely on ABS for breaking because not many ppl know this but ABS is to help with turning, so if you find someone pulles out in front of you instead of just slamming on the brakes turn away from them also. Just my 2c

Ummm no Chris it is there to help with braking for two reasons. When a car without ABS locks up the tyres at a particular speed it will take longer to stop than a car that is braking hard but the tyres aren't locked up. Before ABS this was left upto the driver to modulate the pressure on the brake pedal so that he or she is still braking as hard as possible but the tyre isn't locked up. As this skill is not taught to people the only time they find out is when they need it the most and by then it is too late. ABS simply takes the driver out of this equation and allows the car to stop in the shortest possible distance.

The 2nd reason for ABS is the one you were trying to get at. When a car is emergency braking with its tyres locked up, the tyres have no grip in order for the driver to be able to take action to avoid a collision. Whereas with ABS (or with the driver able to modulate the brake pedal without ABS) the tyres have enough grip for the driver to be able to steer around an object.

I hope this clears it up for you....

Link to comment
https://www.sau.com.au/forums/topic/112290-s1-r33-brakes/#findComment-2070485
Share on other sites

I havent checked to see if I have said cube, but when a 4wd pulled out infront of me one night, and I stamped on the brakes the whole car shutted and there was no smoke, so I gather it has abs

1994 S1 R33

see now my car did something like that earlier when i was driving down the hwy a tad fast... but thats another story... and had to brake...

hrm i think i may check this out sooner than home...

thanks for the info and the pics it helps heaps

:P :P

Link to comment
https://www.sau.com.au/forums/topic/112290-s1-r33-brakes/#findComment-2071259
Share on other sites

Everyone should know whether they have ABS or not, and also be able to tell the difference between warped rotors and having ABS!

As a test, on an empty road accelerate to 80kmph and then slam your foot on the brakes as hard as you can. If your wheels lock up you dont have ABS, if they make a weird grinding noise and you can still maneuvre with the steering wheel then you have it! After you're used to it it will feel weird driving a car without it :)

Incidentally, the stopping power of ABS has saved me twice, once on gravel when a random cow jumped out in front of me, and the second when I wasnt paying attention and nearly drove straight through an intersection!

Link to comment
https://www.sau.com.au/forums/topic/112290-s1-r33-brakes/#findComment-2074345
Share on other sites

just remember... ABS can be worse when on soft surfaces, eg sand.

when you brake on sand, if the brakes lock it digs into the sand and pulls you to a stop.

with ABS it stops the wheels locking, and you continue to go over the sand, stopping at a greater distance than if you got bogged down in the sand from locking up :)

Link to comment
https://www.sau.com.au/forums/topic/112290-s1-r33-brakes/#findComment-2074634
Share on other sites

well i was doing EDITED and when it came time to slow down i didnt slam my foot down but i had to brake pretty hard cause there was a car close. they didnt lock but they made a weird sound like grinding and then i stopped. but when the old bat almost took me out and i slammed them on they locked up...andthat was doing about 70kms and slamming brakes on...

i havent looked yet because i keep forgetting ...

Edited by dan_the_man
Link to comment
https://www.sau.com.au/forums/topic/112290-s1-r33-brakes/#findComment-2075730
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...