Jump to content
SAU Community

Recommended Posts

Item:

Nissan Skyline R33 GTST ECU RB25DET

Description:

This ECU has been modified to use a ROM chip to store engine maps, making it reprogrammable. The stock R33 ECU can not be reprogrammed. The daughterboards used to modify these ECUs are no longer in production and super rare. It’s a direct swap for a stock ECU. I have personally used it on my own R33 Skyline but have no longer use for it as I’ve sold the car.

Items Included:

1x Modified Nissan Skyline R33 GTST ECU with daughterboard for RB25DET engine.

1x EPROM with stock maps and removed speed cut.

As the item is 2nd hand I cannot offer a warranty, I have however used it on my own Skyline.

Postage Conditions:

I am able to post this item at the buyer's expense.

Asking price:

$350 + postage

This ECU has also been advertised on e-Bay:

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...DME:L:LCA:AU:11

Hi,

Are these proms u burnt urself? or was it professionally programmed? if so, who does it?

and are the 2 (H8/534 & N1 NSR) big eproms that was modified? or wat else was modified?

cheers,

Darrien

The 2 (H8/534 & N1 NSR) big chips are not EPROMs and you don't program them. Only the EPROM (chip with white sticker) needs to be reprogrammed, just like in the R32 ECUs. Anyone able to reprogram the old R32 ECUs should be able to reprogram this one.

Tom

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...