Jump to content
SAU Community

Recommended Posts

Hey Guys,

Looking for some advice and for some parts....

The story:

Got defected by RTA for wheels/rubber/ride height - this one i can sort out... I was then passed on to the EPA where i registered 100dB for exhaust pollution at 4800rpm. The limit was 90dB so I now need to pass an emissions test. Copped a $450 fine, for that plus non standard air filters.

Just wondering if anyone could spare me some stock r32 gtr sparts ? Airbox and Exhaust? I will pay to hire it if i have to, or I will buy it too, just dont know where to look... I posted a WTB already.

Secondly, how hard is it to pass an EPA inspection ? It's the one at Lidcombe... has anyone had experience?

Thanks for your help

Link to comment
https://www.sau.com.au/forums/topic/112797-defected/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

Hey Guys,

Looking for some advice and for some parts....

The story:

Got defected by RTA for wheels/rubber/ride height - this one i can sort out... I was then passed on to the EPA where i registered 100dB for exhaust pollution at 4800rpm. The limit was 90dB so I now need to pass an emissions test. Copped a $450 fine, for that plus non standard air filters.

Just wondering if anyone could spare me some stock r32 gtr sparts ? Airbox and Exhaust? I will pay to hire it if i have to, or I will buy it too, just dont know where to look... I posted a WTB already.

Secondly, how hard is it to pass an EPA inspection ? It's the one at Lidcombe... has anyone had experience?

Thanks for your help

Exhaust is what they are most strict about due to noise pollution (if noise pollution is what they got you for, just put stock exhaust back on). If they try to get you for emmissions pollution then ur better off taking the car to complete stock form including exhaust, turbo and performance internals, intake etc.

I had only noise pollution offence 3 times so I never copped a fine except a warning letter stating i could be facing up to $33000 if they catch me again with an aftermarket exhaust system that exceeds noise limit.

Link to comment
https://www.sau.com.au/forums/topic/112797-defected/#findComment-2080228
Share on other sites

It's a bit of a cop out that they do the test at such high RPM. How many of us actually drive around revving our cars that hard to make that much noise on a regular basis? not that many.. You get the occasional few but still, it's not like you're going to sit on 4800rpm through a suburban street at night pumping out that 100db.

Good luck getting it sorted out, unfortunate to hear they've fined you for such petty items.

Link to comment
https://www.sau.com.au/forums/topic/112797-defected/#findComment-2080282
Share on other sites

i've had experiences there.. twice!!! your story is exactly what happened to me!!

i suggest the stock box to pass the epa inspection.. and then put the filter back on plus a box! (thats apparently legal!)

the emissions test is very hard to fudge!! the first time i managed to get my car running very lean, and i passed after a couple of emissions tests... (i think they may have let me off!).. the second time i had to go further being a second offence.. i had my tuner sitting in the car pulling fuel outta the tune, and i had the stock exhaust.. i also went to the emissions facility about 3 times.. did about 20 runs all up before the epa were happy!

a word of advice.. find a perm solution for being under 90dbs... only on the off chance you get done again... the second time for me was very hard to pass, plus the epa took me to court.. it wasn't pleasant, and you can bet it costs a hell of alot more than just fixing the prob!

i also suggest for the emissions test, you go to the penrith facility! alot of people told me the botany peeps weren't nice.. i found the penrith guy to be very nice and friendly!

bad luck with actually stumbling across an epa setup.. most people just complain after they get defected by a cop... all they need is a dodgy mechanic to pass them.. it sux having to go through the actual exercise... ;)

Link to comment
https://www.sau.com.au/forums/topic/112797-defected/#findComment-2080395
Share on other sites

OH!! and actually passing the epa inspection is not hard.. they look at the stock box.. tick.. they do another noise test.. tick if you're under.. its the emissions test that causes all the problems!

good luck!

Hey Moanie, thanks alot for your help... I really appreciate it! The thing is, they told me to go to an epa inspection station at Lidcombe. Thats what im not getting.... it's not botany or penrith... this is an EPA test facility at lidcombe so im assuming they wont do an emissions test?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/112797-defected/#findComment-2080632
Share on other sites

ahh.. the actual epa centre is at lidcombe.. where they will clear your defects... did they actually ask you do do an emissions test when they got you at the epa setup? if not, you'll all good.. and if they don't mention it when you're at lidcombe you're home free!! just don't mention it!!

:D

Link to comment
https://www.sau.com.au/forums/topic/112797-defected/#findComment-2080711
Share on other sites

yeappp.. go as lean as you can!! and richen up when you leave!! take your tuner if possible and try to get the car as stock as possible!

the good thing is, the emissions tests are free... and you can go as many times as you like (though booking the test is hard as there is alwyas a long wait : )... as long as you fax or keep the epa up to date on what you're doing, they'll give you abit of time to pass... that gives you a chance to experiment!

Link to comment
https://www.sau.com.au/forums/topic/112797-defected/#findComment-2082537
Share on other sites

Do they run the car on the dyno up to the test limit ? My noise levels were tested at 4800, so would they only dyno up to 4800 for emissions ? Or do they go the whole rev range

BTW, being a little retarded i misunderstood the defect notice. I do need to go to RTA at penrith, then to EPA to get it cleared

Cheers

Link to comment
https://www.sau.com.au/forums/topic/112797-defected/#findComment-2082737
Share on other sites

the emissions tests involves them putting your car on a dyno, then attaching a pipe around your exhaust to capture all fumes... they then have a road scenario that the guy will drive through... from memory they don't really rev to 4800.. they just go through a normal cruisey drive!! what sux is they put you in a little room with a window so you can see whats happening! lol! you're not allowed to be in the testing room!

they'll give you a print out which you take to the epa at lidcombe... who will then tell you if you have pased or not! the rta emissions guys is pretty nice, so just ask him what the readings should be when he has done the runs... that'll give you an idea if you pass or not....

Link to comment
https://www.sau.com.au/forums/topic/112797-defected/#findComment-2082823
Share on other sites

I just spoke to matt (hitman) who said it's not as simple as just leaning the car out. Apparently they check for 3 types of gases, and if you do lean out, it puts higher temperature in other areas which causes an increase in gas levels or so.... just thought that info might be handy to know.

Link to comment
https://www.sau.com.au/forums/topic/112797-defected/#findComment-2083313
Share on other sites

exhaust noise tests are done at 4800rpm... you have to be at or under 90db at that point!

yeap! thats true! sorry mr flex... there are 3 gases... haha.. i thought the fix was leaning out! matt was the tuner that went out with me... he did alot of work while the guy was putting my car through its paces... i thought it was mainly leaning out the tune.. my bad!

Link to comment
https://www.sau.com.au/forums/topic/112797-defected/#findComment-2083577
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...