Jump to content
SAU Community

Recommended Posts

hey guys

well i got the usual symptoms car misfiring around 3 - 35 -4000 revs and after reading all the possible causes

i thought the easiest one to check would be the plugs

after taking em out i found them to be like this

you never seen someone so happy to find shitty plugs

do you reckon theyve been changed in the last 20000kms?

so whats a good replacement plug?

and im guessing 0.8 gap is the way to go?

post-27568-1144469290.jpg

post-27568-1144469312.jpg

Link to comment
https://www.sau.com.au/forums/topic/112823-a-misfiring-skyline/
Share on other sites

some plugs are meant to be changed even later than that.

You should gap them to 0.8,clean them,throw them in and see what happens.

Btw my car has ngk irridiums and they dont miss a beat @ 13psi 185rwkw.They are 22000km old.All they have seen is a clean with a wire brush.

I think the irridiums are quoted to live as long as 90000km.

There are better plugs out there nowadays though.dont ask me what ones.That time will come when i need newwies.

I just use the coppers.

If you've got a fairly stocker car, the irid/platinum arent so bad... but if your playing around with mods and stuff you can foul them at times so coppers workout cheaper in the end... sometimes.

Depends on the car really. I fouled a fuel reg 5000km's into a new set of irid... @ $100 a set, i wasnt gonna waste that again, back to coppers.

I get almost a year out of them, sometimes less

hey guys

well i got the usual symptoms car misfiring around 3 - 35 -4000 revs and after reading all the possible causes

i thought the easiest one to check would be the plugs

after taking em out i found them to be like this

you never seen someone so happy to find shitty plugs

do you reckon theyve been changed in the last 20000kms?

so whats a good replacement plug?

and im guessing 0.8 gap is the way to go?

If you look closely you can just make out the track marks along the insulator. I would recommend iraway 7's as they are pre gapped. The beauty of iridiums over coppers is that you can open the gaps up a little more.

Well just a follow up post

i havent changed the plugs since i bought the car a months ago and it seemed fast back then

anyway i changed the plugs today to ngk iridiums gapped to .8

feels like a weapon now hey

it just has power all the way through the revs

would definatly recommend changing plugs if ya car is lacking a bit of power or missin a bit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...