Jump to content
SAU Community

Recommended Posts

Gday guys i think i have found my first fault on my 1994 line, either the airbag or horn or both have come loose and rotate inside the steering wheel when i turn, last night it got to the point where as soon as i turn a corner the horn will go of, so i had to disconnect it this morning to get piece of mind, anyway my question is can i take the front steering wheel cover of without the airbag going of? ive been told i came as long as i disconnect the battery is this ok?

Link to comment
https://www.sau.com.au/forums/topic/113317-clunking-horn/
Share on other sites

hey mate.

I had exactly the same thing happen. The are 2 weird bolts holding everything on so You will need some security bits to get the airbag off and pull everything apart. i found my horn part had actually broken and was just dangling round inside the wheel. it wasnt really fixable.

Just disconnect that battery. Good luck!

Link to comment
https://www.sau.com.au/forums/topic/113317-clunking-horn/#findComment-2090651
Share on other sites

Their is a small weight about 10x3cm that sits underneath the horn at the top of the wheel which is held on by 2 screws. The bracket can snap and the weight becomes loose and moves around when you turn the steering wheel (and can even engage the horn when at certain angles).

You need to remove the airbag and just pull out the loose weight.

Edit: It is a very very simple job to fix the problem, but very hard to find a mechanic with the tools that is willing to risk removing the airbag from the steering wheel.

Edited by benm
Link to comment
https://www.sau.com.au/forums/topic/113317-clunking-horn/#findComment-2091768
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, you need to do it properly. You need to start out slow and gentle, ramping it up until they are good and hot, but not cooking, then roll off the other side (instead of letting them cool down quick).
    • I think yeah less hot fuel dumping into the top of the tank that wants to evaporate easily, fewer connections/hoses for permeation. Something like that. Also lower cost/easier production. Even my 2000 LS400/Celsior is a deadhead system. A single fuel hose to the fuel rails which have pulsation dampers attached and no return line.
    • I might do a few more high temp bed ins as described here.  I have a nice quiet 80kph road right near me.  How To Bed-In Your EBC Brakes For Street Or Track Use - EBC Brakes https://share.google/AjnOTILXoiqQnLu8p  
    • I did a few 80-0 stomps. I then just rode the brakes while I applied throttle for a while to get them nice and hot. I live on a big hill and have been down it a few times also with stomps and brake riding.
    • Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
×
×
  • Create New...