Jump to content
SAU Community

Restrucuring Of Ice Performance

Leewah

By Leewah,
in Victoria

 Share

Recommended Posts

Leewah Veteran

Leewah

Posted
  • Author
Posted

NFI Jack, I just copied snowcone's address from the thread in the events section :P Blame the Pres!!

Shouldn't that be 'Bricker' Street instaed of 'Bricket'????

RPMZ Jack, I'll give G a kick in the pants to get this sh|te happeneing. I think he's gonna hold off factory shoots until the refurbishment in the factory is complete and the place has been tidied up.

Of course, as the 2 workshops are so close to each other, there will naturally be some competition however there will still be a fair bit of referral work going on. Make it be known now that this IS an amicable split. There have been no fights, no heated words, not even a GAGF spoken. There IS NOTHING bad going on behind the scenes.

Racingline Rising Star

Racingline

Posted
Posted

Hi guys,

I just wanted to confirm all the above info regarding my move to Racingline Motorsport.

We will be up and running in the week of the 1st of may, so for any info or advice please dont hesitate to call my mobile listed below, as we dont have a land line yet.

I will post a new thread including our range of services etc once we are fully setup.

cheers.

Nigel.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Most women will agree that parking is the most taxing part of driving

      By soviet_merlin · Posted

      I'd be worried about having to parallel park a boat like that. Magnificent car though.
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • MBS206
      new 1.5 LSD issues/concerns

      By MBS206 · Posted

      Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
×
×
  • Create New...