Jump to content
SAU Community

Any Ideas?

7yphon

By 7yphon,
in Engines & Forced Induction

 Share

Recommended Posts

7yphon Experienced

7yphon

Posted
Posted

Well I was on my way home tonight and as I pulled out of a street, I gave it a bit of throttle and as i was tuning something went Bang. I mean it was a big pop noise like when a cooler hose comes off or something, So the car wasnt running right,"Just like if a cooler house came off" so i pulled over and had a quick look. anyway its dark so I cant really see much. But when I got the car home "After a lot of cursing" I had another look under the bonnit there seem to be a splatter of oil on the bonnet but not anywhere you would think off it seems to have come out of the oil dipper stick.

I did also see that the car was not boosting and there was some sort of surge noise comming from the engine.

Im thinking it is the turbo, but I cannot conferm for sure. Any Ideas of insite til then?

Link to comment
https://www.sau.com.au/forums/topic/113472-any-ideas/
Share on other sites
7yphon Experienced

7yphon

Posted
  • Author
Posted

Yer thats what me and mates where thinking last night :'( but we cant think why it would happen like that, EG. I would have thought I would have to be pushing the car really really hard for it to happen.

Yer going to see what's open today if not try and grab something tomorrow

Link to comment
https://www.sau.com.au/forums/topic/113472-any-ideas/#findComment-2092972
Share on other sites
7yphon Experienced

7yphon

Posted
  • Author
Posted

Well I thought I would update those who where reading and helping,

I had a look over the car this morn and too my surprise it was the cooler piping, Now I know why the car wasnt running too great over the last few days as the rubber on the pipe was split.

But there is still the concern about the oil I think ill still get a compresion check done and see what im looking at and how bad the leak is.

Anyway cheers guys, Looks like the car will run for just a little while longer :P

The reason it went bang was the house finally giving up the oil in the lines didnt help so it sliped off :s sheesh I didnt really know a turbo would spool that much psi at low rev's I guess it gives me a insite as too how strong 1 or 2 psi really is.

Link to comment
https://www.sau.com.au/forums/topic/113472-any-ideas/#findComment-2093090
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...