Jump to content
SAU Community

Recommended Posts

Mines is also underneath the steering wheel, behind the plastic facia/footwell - Cops and RTA have checked the car twice and did not find it. Note : Make sure you turn the car timer off at the same time you turn the car off so the cops don't wonder why your car is still running.

Tangles,

A turbo gets extreemley hot. Sometimes even glowing red.

Metal when it is hot should be cooled down gradually (on idle) not rapidley (turning car straight off).

Metal stretches and expands some what with heat and cooling it down to quick will make metal brittle, or crack, or worp.

Thats why my timer for example (apexi) is attached to the oxygen sensor. The more air that flows through it (eg. if your putting your foot down) the longer the automatic feature on the timer will keep the car on. I just set mine for a minimum of 30 sec and a max of 3 min, and the timer figures out how hard I have driven the car and sets accordingly.

Hope that helps

Yah I know matey, thats why I drive off-boost a few kms before I get home (usually, that is!) to give the stnd turbo some chance of cooling down, and if I have been on boost then I'll let the car idle for a short amount of time once in my garage.

Guess Im sort of trying to ruin the turbo - want a hiflow! LOL nah in all seriousness, I let it cool down but I dont leave the car running if Im not in it - my Stagea is our family wagon and I dont want my kiddies driving off in my car! Nor do I want to turn into FlameBoy at the local petrol station. :sick:

The timer thats in my car is a no-name Jap brand, and seems to want to make the car idle for 3mins, just seems dangerous to me, thats all.

Mate if you're worried about your kids driving off while the turbo timer is keeping the car running just get one with a handbrake safety feature. If the handbrake is released the car shuts off. Stops your car being stolen that way too.

My mate had a Greddy turbo timer installed in the ashtray in his R32. I thought that was a good spot.

Turbo timers can be useful if you're an impatient person but tangles has it right! The best turbo timer you can have is your self!

Before the flurry of posts come in, think about it. As well as the air flow over the engine/turbo what else cools the motor. . . . Correct. Oil and coolant, so you need air flow through the radiator for effective heat transfer. If you've just had a spirited run and you pull in and shut off - while your car sits idling it will only retain the heat or if your motor or fans viscous hub isn't in such good shape your engine will struggle to regulate temps. Where as if your controlled enough to drive sedately for the last few minutes of your drive, your engine will cool significantly quicker due to the increased heat transfer via the radiator. Those with an oil cooler are better off again.

And I have tested this with oil, water and exhaust temp gauges in my car

All that that said, If you drive hard and don't want to slow down before stopping than a turbo timer is better than nothing as the engine is hot but as I've seen from the exhaust temps, the turbo is much hotter and the run on period does disperse the heat to other parts of the motor slowly to bring turbo temps down.

Edited by ellie

I have a Apex'i pen timer and i dont even show it...on a 32 under your right knee is the fuse cover ive put it under that...no one can see it. I also used to have it mounted up my a'pillar and munted under the sun visor.

I got a Hks timer. Not exactly discreet but when I bought my car, it was installed in the din under my head unit. A real pain in the arse. The wires are drilled through the bottom, so I can't pull the console sorround off. Not a bad looking spot but.

If you want to go discreet, install it in the glove box or in the centre console.

  • 2 weeks later...

what did you guys use to stick it to the plastic parts of your dash?

Also, I know that being a meter away from your car with the engine running is illegal, but is having a turbo timer actually installed a defect?

Like if a policeman pulled me over and tried to defect me for having a turbo timer, couldn't I say, I sit in the car and only use it as a timing device and wait for the engine to cool down.. eg, you haven't actually seen me leaving the car with the turbo timer on and the engine running, and therefore cannont touch me??

I have the Greddy Full Auto Timer which is stuck onto the top of my steering column using double sided velcro tape.

The unit is black and when turned off blends into the column to a certain degree.

Don't really know whether or not it's totally necessary in terms of keeping my turbo alive but it did give me much more bottom end power and 25rwkw at peak :woot:

My turbo timer location is the same as my traction control device and my maximum power output limiter - in my head (i.e. a bit of basic common sense).

If you can't remember to cool down the turbo(s) by idling or driving off boost after giving them a flogging, then you shouldn't really be driving such cars.

Turbo timers also help thieves by offering clear and easy access to hot wiring cars. Finally, check with you insurance company about their opinion of turbo timers.

Just my 2C worth.

My turbo timer location is the same as my traction control device and my maximum power output limiter - in my head (i.e. a bit of basic common sense).

If you can't remember to cool down the turbo(s) by idling or driving off boost after giving them a flogging, then you shouldn't really be driving such cars.

Turbo timers also help thieves by offering clear and easy access to hot wiring cars. Finally, check with you insurance company about their opinion of turbo timers.

Just my 2C worth.

I remember them saying exactly the same thing in HPI.

Personally I think it's a bit silly to say that people shouldn't be driving turbo cars just because they use a turbo-timer.

I don't think it's a question of intelligence, I think it comes down to convenience.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
    • ..this is the current state of that port. I appreciate the info help (and the link to the Earls thing @Duncan). Though going by that it seems like 1/4 then BSP'ing it and using a bush may work. I don't know where I'd be remote mounting the pressure sender... to... exactly. I assume the idea here is that any vibration is taken up by the semiflexible/flexible hose itself instead of it leveraging against the block directly. I want to believe a stronger, steel bush/adapter would work, but I don't know if that is engineeringly sound or just wishful thinking given the stupendous implications of a leak/failure in this spot. What are the real world risks of dissimilar metals here? It's a 6061 Aluminum block, and I'm talking brass or steel or SS adapters/things.
    • And if you have to drill the oil block, then just drill it for 1/4" and tap it BSP and get a 1/8 to 1/4 BSP bush. The Nissan sender will go straight in and the bush will suit the newly tapped hole. And it will be real strong, to boot.
    • No it doesn't. It just needs an ezy-out to pull that broken bit of alloy out of the hole and presto chango - it will be back to being a 1/8" hole tapped NPT. as per @MBS206 recco. That would be for making what you had in alloy, in steel. If you wanted to do just that instead of remote mounting like @Duncan and I have been pushing. A steel fitting would be unbreakable (compared to that tragically skinny little alloy adapter). But remote mounting would almost certainly be 10x better. Small engineering shops abound all over the place. A lathe and 10 minutes of time = 2x six packs.
×
×
  • Create New...