Jump to content
SAU Community

R34 Gt-t Left (passenger Side) Window Glass Smashed..


Recommended Posts

Recently got my coupe R34 GT-T's left (passenger side) door window glass bashed.... :) Does anyone have or know where can I get a fast replacement (including installation preferred), in Sydney area? Any other suggestions welcome. Thank you!

Edited by m-p

Ask satanic (Stan). His car recently got broken into and I'm pretty sure he had to get a new window (not sure if it was passenger or drivers side).

Or better still, wait for someone who knows an asnwer to reply ^_^

Thanks guys for all the replies.. :( I have contacted Stan, he is very nice and informative.., but as he also got the passanger door's window broken. Therefore, I am still waiting to get the confirmation from some companies like Obriens, Novus, JustJap, SSS, and Nissan (Nissan did provide a solution but it is extremely expensive and lenghty). So any other suggestions will be really appreciated. Thanks once again, :laugh:

To Abo Bob: It is the door window..

Edited by satanic

I had my drivers side smashed when people tried to break into mine got it replaced by PowerPlay. They replaced it and everything for about 250 to 300 I think. Only place that had one for an R34. No point calling Obrians they dont have them.

Edited by CWest

$250 - $300 for a full window replacement + any associated trims is an absolute steal!

I had my mate run some prices from Nissan and the door window plus trims came to about $2k to repair!!!

I have PM'd Cwest to ask whether its the smaller glass or the door glass.. Because yesterday I received an email reply from SSS which said that they have the left window glass, for $250.... I gave them a ring to confirm that they have the door window glass, and again they said they have it. Finally I went to Girraween (near Blacktown) from City, only to know that they were mistaken, the one they have is the smaller one.... :laugh: At the moment, the best price I can get is from Randwick Nissan, $1190.35 excluding installation and 2 weeks delay....

Edited by m-p

See what I mean?

Also, $250.00 for the back quarter glass is a good price considering they are about $470.00 brand new (trade price) from Nissan.

Did you see if the rear glass came with the mould? Or was it just the glass... you need to get it with the mould, as it is a sealed unit.

See what I mean?

Also, $250.00 for the back quarter glass is a good price considering they are about $470.00 brand new (trade price) from Nissan.

Did you see if the rear glass came with the mould? Or was it just the glass... you need to get it with the mould, as it is a sealed unit.

Unfortunately I didnt see the back quarter one they have as I dont need that part, so I cant tell whether or not it includes the mould..

Just thought I'd post up that my glass got re-fitted tonight... excellent job done by Mick from Unique Auto Glass! In and out of my workshop in about 1.5hours which included removal from another car and transfer into mine.

The finish is so good, you could swear I was never broken into :(

Also, for all those who think that the rear quarter glass cannot be transferred, you are wrong! Mick did it with a special tool and did it very quickly...

m-p if you need someone to do your glass, talk to Mick - 0425371057

Also you might want to call him up and talk to him about my case, then your case - apparently he's found tonnes of sources for the glass (topic of conversation tonight)

Might save yourself a dollar or two!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...