Jump to content
SAU Community

Recommended Posts

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

oil world sold me redline gearbox for $100, but that was almost a year ago.

It's funny, you put it in, and don't really notice much difference, it takes about a week to really start working, it must take a while to get into all the gears and what not. or maybe i'm just imagining it!

redline gearbox oil is pretty high on my list of "good mods"

I have had a leaking gearbox reverse switch (i think) for a while now, i really should fix that, it's like liquid gold! $5 a drop

I have used the "blue Smurf" in 2 RB20/30 gearboxes now, boht after developing synchro issues.

The first one spat the mail bearings after 15K Km of use with the red line stuff, but i blame that almost enitrley on a failed spiggot bush.

The second gearbox has only just had it put in, and had immediate improvement.

My 3rd gearbox, which is in another car has Castrol MTX gear oil in it. It is 1/4 of the price and has worked just as well as the blue smurf. It is listed as a motorbike oil, and is quite thin however i was told it was still suitable for this application. My only concern is that the bearings may not love it, but it hasnt been in there long enough to tell. Just another option if your looking for a quick cheap fix.

Brent.

  • 1 month later...
So is there any conclusive evidence against Redline oils on new gearboxs/syncros?

This topic really left me undecided because I'm putting in a new box but still with an unknown condition. :

you mean a second hand box, thats new to your car?

i'd say it'd be fine...unless its just been rebuilt....

So is there any conclusive evidence against Redline oils on new gearboxs/syncros?

This topic really left me undecided because I'm putting in a new box but still with an unknown condition. :

The one or two reports that said DON'T USE IT WITH A MINT GEARBOX are enough to put me off. I'll use Motul Gear 300 in my gearbox and diff instead, I reckon. I'll start using Shockproof when my synchros wear out :(

i am currantly running superlight shockproof and find it quite good once its warmed up say a few minutes,very silky shifts,, so yeah i feelit is good:-)

You can actually rate Redline lightweight shockproof as 75w140 but it is build very differently. One of the must have if you are generating big power.

Clink link below for more technical details:

RL lightweight shockproof

Edited by Trex101
The one or two reports that said DON'T USE IT WITH A MINT GEARBOX are enough to put me off. I'll use Motul Gear 300 in my gearbox and diff instead, I reckon. I'll start using Shockproof when my synchros wear out :mad:

Don't use it with a mint gearbox??? Where did u get that from? So if your gear box is fine, you shouldn't use redline oil at all?

I was under the impression that the consensus seemed to be don't go Redline if your box is new/rebuilt but go for it if the Synchro's are a bit older or a little tired =) I'm still yet to have any problems with it and the box is still noticeably smoother than it was and also eliminated grabbing under WOT through 2nd -> 3rd and 3rd -> 4th. I still need a new clutch and I'm hoping that will be the end of any grabbing through changes all together (as it will still do it occassionally through 4th -> 5th at high RPM.

Cheers

Don't use it with a mint gearbox??? Where did u get that from? So if your gear box is fine, you shouldn't use redline oil at all?

Dont use the shockproof. Its got additives in it to make it a thinner more slipperly oil. Normal non shockproof oil should be ok. Id probably go the castrol or motul stuff tho if your gearbox is in good nick.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...