Jump to content
SAU Community

Recommended Posts

Hi guys, i took out the speaker the other day and noticed a small amount of water collecting inthe bottom of my door. Obviously this is not the best thing so i look at the external rubber strip the window slids up and down agains and there is a bout a 3-4mm gap. I take it this needs replacing???

My questiong is 1# is this a DIY job or for the cost and effort (like is it relativly cheep) should i take it somewhere

2# where do i take it, a windscree place??? Nissan Dealer (genuin parts woudl be expensive)

Really im just after soem advice, surley someone must have been through the same thing.

Michael

Link to comment
https://www.sau.com.au/forums/topic/114554-window-seal-help/
Share on other sites

You have a 3mm gap with the door open? I don't know if you've noticed, but when you close your door with the window up, the window actually moves out as it hits the frame of the door (rubber). That keeps it tight and stop the water from coming in through the top of the window.

You could check that the window-guides are tight. They are the little furry pads with an adjustable lock-screw on it. They can be seen with the door trim removed, so you should be able to get a socket on them no worries.

As far as water in the door, mine does that too, but looking at the design, it seems to be a normal thing? There are drainage holes in the bottom, but I don't get a LOT of water, just a little bit when I go through a pressure-wash or something. Even the speaker has the top covered, in what looks like an attempt at keeping it dry. The bottom of the speaker pod is completely open.

Thanks for that man long time no speak :(

Yeah i noticed it move a little, just though it was strange that there was water inteh bottom and it seems to have more down the bottom then the othe window =/

If it was a seal as the other isn't as bad what type of place would you reconmend going.

Michael

Heh! It has been a while, eh? Hope the car is still going well for ya! I have been up the central coast a few times since you were last down!

The seal, it'd be pretty specific, so start with Nissan, get a genuine price, then call a wrecker such as JustJap and ask them what they want for a decent used one. They don't usually have a set price or stock of little things like that, but Darren is always keen to help you out, and will try and find one off a half-cut for you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...