Jump to content
SAU Community

Recommended Posts

First post ever!

I have been looking at buying a R33, The one I looked at was nice pretty stock which is how I wanted it, But I had to also convice my dad to let me get it. He loved the one we looked at but we had a RACQ check done on the car.

The RACQ wasn't to bad except it came back with alot of 'illegal' things such as BOV and air filter etc. One of the ones that he really didnt like was the fact that the 17' mags on it came back saying 'incorrect wheels for car - illegal size and incorrect and illegal spacers fitted'.

I was maily wondering how stuff like that affects insurance and with a stock 33 - say it has a body kit, legal hight, stock engine (turbo) and mags on it - what could the cops book you on?

Can you really get slammed by the cops if you have done no engine mods?

Also I spoke to RACQ and Nissan before I seriously look at the car and they both said ' i wouldnt even touch the car - stay well away from then', 'personally i wouldnt buy one - expensice to service etc' Wats your comments?

I just after a bit of info.

Thanks alot

Link to comment
https://www.sau.com.au/forums/topic/114739-first-time-buying-a-new-skyline/
Share on other sites

Lol, for starters any modification you make to a car it draws attention to it from the Police.

If ur 17 and are buying a turbo car you in the same boat as me sort of. Im 19 this yr. Insurance is a bitch. Your looking at something around the $2500 mark easily.

Ummmm with the wheels im nt sure what the go is with them but yes spacers are illegal. Correct me if im wrong everyone else. But they are illegal as the wheel isnt bolted onto the hub its bolted onto the spacer which is bolted onto the hub. So the wheels not technically on the car.

Ummmmm Bov well you would have changed the stock one anyway and Pod isnt illegal unless its flapping around and not secured with a bracket.

Im not 100% on all this info but just what I have researched.

Goodluck mate

Edited by R32_4door_drifting

why did they say they wouldnt touch it? because it has wild, crazy illegal mods like a bov and pod? If for that reason then thats a rediculous claim......

here in Perth, spacers are illegal. wheel size can go 2" larger than in diameter from stock. not too sure about width. id imagine 17" wheels on a Skyline would be fine, unless it had some hugely wide wheels on it....

they are certainly not overly expensive to service, relatively easy to do yourself if u can. i guess the only thing with grey imports is panels etc if u have an accident. getting the right panel to fit can be a drama sometimes.

motors are strong and very reliable if looked after especially if your not planning to modify. you may need to spend a little more on some decent oil and of course 98RON fuel, but apart from that its a much better value car than a VS Commodore of the same era.....

Edited by _8OO5TED_

Thanks alot, The insurance quote I got was for 1700 full comp,which i was thought was great.

and im only 18, 19 in aug,

I am keen to get one, now the one I have like just got sold, its hard to find a neat clean one around. I like the nizmo body kits, just somthing plain and stylish.

Thanks for your info,

Do all yous skylines have spaces on them for the mags?

if anyone else can add anything please feel free, it helps me alot.

one thing about insurance they will probably accept the car and you pay the money. but when you go to make a claim they may say "no your car has illegal mods and cannot be covered by us".

Spacers are not legal anywhere i think, i wouldnt really risk it personally. also if a cop want to defect you they can. i had one threaten me with a defect, i was being a smart arse so i kinda deserved it, and my car was a stock as a rock VS Commo...

atmosphere vent BOV are illegal, also, depending on where you are, and intercooler AND pod filter are illegal. although i havent heard of anyone getting done for it. theres a scan somewhere on the forums about it. it may be a state specific tho.

Oh before i forget. if you have the right wheels for the car you shouldnt need spacers. he may have just been unlucky when getting rims that they had the wrong offset or something and they were rubbing and so needing spacers...

Edited by Freddy Kruger

spacers required if wheels are an incorrect offset.

with illegal mods being on your car and weather insurance is valid or not is going to depend on the insurance company. some are far more leanient than others.....

I would never get RACQ to check over an import they hate them and will have a negative comment against them everytime. Get a mechanic that knows the car in question to check it out for you.

I had RACQ pull my old silvia to pieces and got it checked out by a mechanic (family friend) who may I add is RACQ approved and he said there was nothing wrong with it.

My 2cents

Chris

Edited by alphanumeric

Justcar Insurance

But you can't pay your premium by the month, its 1700 Straight up - but I havnt completly read the 32 page policy, but i have noticed it says any modifications done they will not cover you...not to sure what there limit is, becuase they actually ask you what you have on your car when you quote.

Hey mate. How much are you willing to spend? There are tons of R33's in and around Brisbane at the moment so you shouldn't have trouble finding one to buy. RACQ would shred the hell out of mine but that's what you get when you mod your car. At the end of the day, I have a damn reliable and well running car for a 1994. RACQ are throrough because they have to cover anything they miss. They are legally bound to. That's why they're so picky.

i just bought mine bout 3 months ago. i had it racv checked (vic) i thought it was a waste of money. they listed the most obvious things on it. like non standard gear knob, non standard wheels(18's) front and rear strut braces, exhaust. nothing in depth about the engine, transmission, turbo. they said on the phone they did a compression test but there was no results on the report. the only reason i didnt go to a mechanic is because it was the end of jan and he was on holidays. i just couldnt let the car go or it wouldnt be there when i came back. so i had to settle for racv check.

i went into great depth to uncover the pod filter legalities. i spoke to vic roads and the epa and a rwc place. the rwc place didnt know shit. they claimed any pod filter was illegal. this isnt the case, vic roads set the rwc standards and they have a manual that all registered rwc places have to be familiar with. they have to be a paper eliment they have to be secure and they have to retain the air flow meter. and if you have a pod you cant have a fmic or vice versa its only one intake mod aloud. (these are the rules and regs in vic)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even with the piston at TDC there was room for it to drop, but I don't think it can drop fully into the cylinder, the problem you have is that you need something pushing against the valve to hold it up so you have enough room to put the new stem seal on and the spring etc.  I used compressed air only because putting rope in the cylinder seemed a bit risky to me, I know people have done it countless times before like this. Overall it's a pain in the ass job. Honestly you'd probably be better off taking the head off because the risk of dropping something in the engine and the finicky-ness of it all is very stressful. If you are going to attempt it though i 10000% recommend a 36050 valve spring/keeper tool. I had both the traditional lever type and after doing 1 cylinder it was absolute pain to get those valve keepers in place, even with 2 people. That 36050 is amazing, you do have to push hard to get them in place but it works perfectly almost every time. Back to my actual issue I think my engine is just tired and old and the rings have gone bad. The comp numbers (cold, no oil) were: Cyl 1 -129psi Cyl 2 - 133psi Cyl 3 - 138psi Cyl 4 - 137psi Cyl 5 - 157psi Cyl 6 - 142psi   Cylinder 5 and 6 having the most carbon on them.
    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
×
×
  • Create New...