Jump to content
SAU Community

Recommended Posts

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

Hi Brian,

I'm after the high pressure hose/pipe which is attached to the transfer case at the back of the gear box. This hose/pipe can be unscrewed easily. I've attached the pic of it; Please let me know if you have it.

Cheers,

Danny

post-28574-1146404219.jpg

Hi Brian,

I'm after the high pressure hose/pipe which is attached to the transfer case at the back of the gear box. This hose/pipe can be unscrewed easily. I've attached the pic of it; Please let me know if you have it.

Cheers,

Danny

Sorry mate, i do not have it, it was missing.

Edited by Midnight Racer
do u still have the indicators?? are they all orange or clear with orange indicator? where in southside of brisbane are u located? interested in door trims as well if they will fit a gtst.

sorry mate, indicators sold and pick up today. door trim is still avaulable. I live in stretton.

I think it can fit gtst bcz door size is same.

Edited by Midnight Racer

Do you have the two interior kick panels that is the cover over the computer on the passenger side and the other one is next to the drivers right foot. I'm also after the ash tray under the stereo and the two GT badges on the front guards. If you have these things please pm me your phone number and I will contact you. Thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...