Jump to content
SAU Community

Recommended Posts

hi guys ive taken the following parts off my r33 gts-t

* Top 1/2 of stock plenum and Throttle body- $90ono ( will seperate if both buyers are there)

* Assorted black and stainless steel piping, used with the hybrid cooler (pics on request to make things easier) $POA

* Oil Catch Can- no breather on top, return outlet to sump- $10

* Stock fuel pressure regulator- $20

* Stock washer bottle with motor -$10

* HKS pod filter ( filter needs replacing)- $10

* 3" dump pipe ( rusty) $10

* 3.5" dump pipe ( bit rusty but mainly good)- $20

* Support bar with bonnet latch (infront of radiator) $15

* Various hoses- $POA

* GFB Hybrid bov bottom attachment- $10

* Not sure what it is, but i heard it was a pollution thing, pic attached, GREEN- $POA

* Custom steel intake pipe with 4" attachment down to 3" to fit afm, or u can just cut the 4" piece off- $50

BOTH OFF TRUST TURBOS so they have a different flange, but u can just chop it and change the flange to bolt to stocker if u like

* center muffler from a 3.5" system- $15

* boot floor carpet and battery cover carpet- $10 each. or $15 for both pick up due to size and shape

* Splitfire coils series 2 rb25det SOLD!!!!

Available soon:

* sunvisors- $25/pair (33apx buyer)

* MAYBE: series 2 coil harness- $80

EOI: unsure yet whether to upgrade core size or not, but its a HYBRID (genuine bar and plate) 600x300x76- $350ono ( excellent condition!!!) handled 350rwkw with no problems at all

pics available for all parts

Cheers...Ben.

post-4085-1146356344.jpg

post-4085-1146356366.jpg

post-4085-1146356384.jpg

post-4085-1146356411.jpg

post-4085-1146356467.jpg

post-4085-1146356511.jpg

post-4085-1146356552.jpg

post-4085-1146356574.jpg

post-4085-1146356589.jpg

post-4085-1146356614.jpg

post-4085-1146356638.jpg

post-4085-1146356662.jpg

post-4085-1146356682.jpg

post-4085-1146356710.jpg

post-4085-1146356727.jpg

post-4085-1146356755.jpg

Edited by 2BNVS
Link to comment
https://www.sau.com.au/forums/topic/115493-lots-of-parts-for-sale/
Share on other sites

* boot floor carpet and battery cover carpet- $10 each. or $15 for both pick up due to size and shape

dude - i want the battery cover carpet. Can you post it to me? If so, how much for postage?

i am in Melbourne. Please contact me at [email protected] .PM sent with my phone number

cheers!

ardie: i just got an autronic ignition system put on it, and needed series 1 coils that didnt have the inbuilt ignitor otherwise they would fry...

anexiole: pm sent

Pawley: ill have a lok for ya...

RBFIRE: ill give ya a pm later on regarding price

cheers...ben.

I will take the washer bottle, please pm me your bank details with how much postage to Sydney will be (another $10 should cover it?) and I will DD the money asap.

You seem to have left the washer bottle on the list, so I will offer to buy it again :wave: I can still DD the money immediately, but you can post it whenever is convenient for you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...