Jump to content
SAU Community

Recommended Posts

http://www.skylinesaustralia.com/forums/in...opic=80624&st=0

HKS 2530:

TURBINE:

Inducer = 53.8 mm

Exducer = 47.0 mm

Trim = 76

A/R = 0.64

COMPRESSOR:

Trim = 63

Inducer = 47.7

Exducer = 60.1

A/R = 0.60

R34 N1's

TURBINE:

Inducer = 53.85 mm

Exducer = 42.4 mm

Trim = 62

A/R = 0.64

COMPRESSOR:

Trim = 55

Inducer = 44.57

Exducer = 60.1

A/R = 0.60

HKS GT-SS

TURBINE:

Inducer = 53.85 mm

Exducer = 42.4 mm

Trim = 62

A/R = 0.64

COMPRESSOR:

Trim = 56

Inducer = 44.46

Exducer = 59.41

A/R = 0.42

Edit: I have my suspicions that some of the A/R numbers are off. It looks to me for all the world like the R34 N1s were the base for the GT-SS, although someone else will have to comment as to whether they use the same catridge.

Link to comment
https://www.sau.com.au/forums/topic/115599-n1s-vs-2530s/#findComment-2130860
Share on other sites

Hey No one

I recently bought a pair of Garrett GT2860R - 707160-5 and i'm happy. Lots of power on tap and very drivable.

My current RB is getting a bit long in the tooth for big boost and HP, but i'm still having lots of fun. Had some adjustable cam gears fitted as well as the usual bolt on mods

TURBINE:

Wheel dia. = 53.8 mm

Trim = 76

A/R = 0.64

COMPRESSOR:

Trim = 62

Inducer = 47.2

Exducer = 60.

A/R = 0.60

Edited by Mr. Keets
Link to comment
https://www.sau.com.au/forums/topic/115599-n1s-vs-2530s/#findComment-2131473
Share on other sites

hey crimmo and mr keets

do you guys have any dyno sheets of them yet??

also whats the spool time like?

and cheers to Iwells for the link .... big help hey

Hey No one,

sorry i'm a million miles from my R at the mo, so i cant post the sheets. Check out turbobygarrett.com and you can see the maps, Mine is making 406hp at the back wheels, I picked up 70rwhp on a 17 year old engine...fuel system running out of puff now. Every combo is different and so is the tune up.

Find a good tuner and ask to see some dyno sheets.

Link to comment
https://www.sau.com.au/forums/topic/115599-n1s-vs-2530s/#findComment-2137605
Share on other sites

From my research, it looks to me as Lucien suggested: That the R34N1 are more or less the same spec as the HKS GT-SS.

Now remembering that both of the above are based on a Garrett Turbo,

The version of Garrett GT2860r that I bought is the "-7", and I got this because it had more or less the same specs as the GT-SS.

I've recently gone back to the Garrett Website and now find that they have actually mentioned that these are indeed the "OEM on Nissan RB26DETT used in Skyline R34 GTR N-1..."

You can see it here:

http://www.turbobygarrett.com/turbobygarre...0R_707160_7.htm

Read the little blurb on the left...

...and yes - they are an excellent turbo I think.

Link to comment
https://www.sau.com.au/forums/topic/115599-n1s-vs-2530s/#findComment-2141261
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
×
×
  • Create New...